瀏覽單個文章
cmwang
Elite Member
 

加入日期: May 2002
您的住址: 板橋
文章: 5,112
引用:
作者sakura26
snipped....
我會這樣講主要是因為兩三年前買的同晶片組DFI 975X可以正常使用的, 過去用的其他晶片組的板子也都可以跑PCI-E介面卡不限種類, 所以才覺得怎麼好像微星做不到很奇怪?
不過未來PCI-E的卡片漸漸要普及了, 要是微星再不改的話那真的會造成問題...


DFI的板子上有x4的slot是由ICH7生出來的(是給一般的卡用的,而不像MCH的2x8有標明"intended for supporting up to two external PCI Express graphics card in bifurcated mode" ),您是插在這個x4上還是插在由MCH生出來那兩個x8上啊 ....

引用:
作者sakura26
姆, "fully compliant to the PCI Express Base Specification, Revision 2.0." 指的是完全相容PCI-E 2.0的Base Specification? 這樣指的應該是相容於一般的PCI-E的使用吧?


那前面那句"intended for supporting up to two external PCI Express graphics card in bifurcated mode"要做何解啊 ....BTW,一樣是desktop用的chipset,A社的RS690 databook中就清清楚楚的寫著....

引用:
1.3.3 PCI Express® Interface
• Compliant with the PCI Express (PCI-E) 1.1a Specification.
• Highly flexible PCI-E implementation to suit a variety of platform needs.
• Supports a x16 graphics interface.
• A single-port, x16 graphics interface, configurable to any of the following modes of support:
• An external graphics device utilizing all 16 lanes.
• A TMDS interface, enabling DVI/HDMI (see section 1.3.9, “DVI/HDMI (Not applicable to the RS690C)” below for details).
• A single x1, x2, x4, or x8 general purpose PCI-E link.


或許這就是鵝前面說的"看來I社對desktop/workstation或server chipset的市場區隔還是蠻嚴格的"的原因吧....
 
__________________
士大夫之無恥,是謂國恥....
舊 2008-06-06, 02:11 PM #12
回應時引用此文章
cmwang離線中