目前系統已經穩定了.~_~"
以下是我的設定
MIT:
Robust Graphic Booster - Auto
CPU Clock Ratio - 9x
CPU Clock Control - Enabled
CPU Mhz - 300
PCI Mhz - 100
CIA2 - Disable
System Memory Multiplier - 2
DRAM Timing Selectable - Manual
Cas Latency delay - 4
DRAM RAS# to CAS# delay - 4
Prechange delay - 12/13
ACT to ACT delay - Auto
Write to Prechange delay - Auto
Refresh to Act delay 0
Read to Prechange delay - Auto
Memory Performance Enhance - Normal
System Voltage Control - Manual
Dimm OverVoltage Control - Normal
PCI-E OverVoltage Control - +0.1v
FSB Overvoltage control - +0.1v
(G)MCH OverVoltage Control - +0.1v
CPU Voltage Control - 1.5v
不過超頻後用TAT測試跑100%的話,
溫度會上到81 跟 81
...