http://www.msicomputer.com/product/..._Neo-F&class=mb

CPU
• Supports Socket 775 for Intel Core2 Extreme, Core2 Duo, Pentium 4 (Prescott, P4EE), Pentium D, Pentium XE/Celeron D processors in LGA 775 package
• Supports FSB 800/1066/1333 MHz
• Supoprts Intel 05B/05A and 04B/04A processors
• Supoprts EIST techonology
• Supports Intel Hyper-Threading (HT) Technology
• Supports Intel Quad Core Technology to 1333MHz and up


Chipset
Intel® P35 Chipset
• Supports FSB 800MHz, 1066MHz & 1333MHz
• Support Dual channel DDR2 667/800 memory interface up to 8GB
• Support Dual PCI Express 16X interface

Intel® ICH9 Chipset
• Integrated Hi-Speed USB 2.0 controller, 480Mb/sec, 12ports
• 4 Serial ATAII ports w/ transfer rate up to 3Gb/s
• PCI Master v 2.3, I/O ACPI 2.0 Compliant
• Integrated AHCI controller


FSB
• Support FSB 800MHz, 1066MHz & 1333MHz


Main Memory
• Supports 4 unbuffered DIMM of 1.8 Volt DDR2 SDRAM
• Supports up to 8GB memory size
• Support Dual Channel DDR2 667/800MHz and up (Intel P35 chipset supports up to DDR2-800 officially. For DDR2 800+, manually BIOS adjustment is needed)

Due to the High Performance Memory design, motherboards or system configurations may or may not operate smoothly at the JEDEC (Joint Electron Device Engineering Council) standard settings (BIOS Default on the motherboard) such as DDR2 voltage, memory speeds and memory timing. Please confirm and adjust your memory setting in the BIOS accordingly for better system stability.
Example: Kingston HyperX DDR2-800 PC6400 operates at 2.0V, 4-4-4-12.
For more information about specification of high performance memory modules, please check with your Memory Manufactures for more details.

Slots
• One PCI Express 16X slots(PCI Express Bus SPEC V1.0a compliant; supports CrossFire Technology)
• Three PCI Express 1X slot
• Two PCI 2.3 32-bit Master PCI Bus slots. (support 3.3v/5v PCI bus interface)


On-Board IDE
One Ultra DMA 66/100/133 IDE controller integrated in Marvell 88SE6111
• Supports PIO, Bus Master operation modes
• Can connect up to 2 Ultra ATA 100 drives

Serial ATAII controller integrated in ICH9R and Marvell 88SE6111
• Up to 300MB/s transfer speed
• Can connect up to 5 Serial ATA II drives (4 internal drives from ICH9, 1 drive from 88SE6111)


On-Board Peripherals
• 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
• 1 Serial port
• 12 USB 2.0 ports (Rear x 4/** Front x 8)(** Front USB ports are supported by pin-out)
• 1 6-in-1 audio jack (S/SPDIF out)
• 2 PS/2 connectors
• 1 LAN RJ45 connector


Audio
High Definition link controller integrated in Intel ICH9 chip
• Audio codec Realtek 888
• Compliance with Azalia 1.0 spec
• Flexible 8 Ch. audio with jack sensing


LAN
• Realtek RTL8111B PCI-Express Gb LAN Controller


BIOS
• The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications.


Dimensions
12in.(L) x 8.65in.(W) ATX Form Factor

Mounting
6 mounting holes