|
作者白色果醬
我想把我的5170a@7173a但在步驟2就出現以下錯誤訊息:
Preparing to start the bootcode flash procedure...
Now WAIT until this procedure is finished!
Starting the bootcode flash procedure...
Setting the new drive ID...
Setting the new drive identifier...
Switching drive to safe mode... Error!
Error! If you have changed the drive ID with tool such as the Drive Converter,
change the drive ID back to its original value first!
Trying to revert the drive identifier change... Done.
Trying to revert the drive ID change... Done.
Operation FAILED! However your drive may be still functional after reboot.
請按任意鍵繼續 . . .
---------------------------------------------------------------
不知那裏出問題了...我有將DMA設成PIO,甚至所有動作都在安全模式下進行,都還是出現上列錯誤,請網大們幫一下忙,看看該如何解決...試試看先用OptrID裡面的set5170A.bat把ID改回5170
在執行btflash-x17xA裡的bfl7173A.bat
然後再用OptrID裡的set7173A.bat
能過的話再刷韌體~
|