Good time all.I have some question base on the following specs:

Intel Core 2 Duo E4300
ASUS P5LD2 SE
Kingston KHX7200D2K2/1G
Seagate 80GB SATA(System)
Seagate 80GB PATA(Backup)
GeForce 7600GT 256MB 128Bit
Original 550 watts PSU

1.)In the BIOS setting if using ASUS AI to set the FSB1333/DDR667 it will work but can't pass the SP2004 test because it will make my unit restart.What I can do?
2.)If in the BIOS use manual mode then set the CPU to 333MHz then DDR 666 it will not start after save the BIOS setting to CMOS.What I can do?
3.)I would like to set the CPU speed at 3.5GHz(389*9) then what kind of the setting I have to do?

Thanks for your help^^