Region code Hack for ADV-2360
The procedure must be done WITHOUT a disc in the player, must use the remote control.

1. Turn on the ADV-2360.
2. Open the Tray and press SETUP on the remote to go to the setup menu
3. Inside the setup menu, press in sequence the following buttons: ZOOM, PREV, NEXT. Then on the top of the screen you will see "XX1XX".
4. With the arrows on the remote, press left or right to change until the desired region number appears.
5. After region is selected, press SETUP to go back to the main screen.
6. Bring the popcorn and enjoy.

以上是網路找的的方法, 可以試試看. 大意如下:


破解 ADV-2360
整過過程必須在光碟機裡面沒有光碟片的情況下進行, 並且必須使用遙控器

1. 啟動 ADV-2360
2. 送出托盤, 然後按下遙控器上的 'SETUP' 鍵以進入設定選單
3. 在設定選單裡面, 依照順序按下以下的幾個按鍵: ZOOM, PREV, NEXT. 然後在螢幕上方你可以看到 "XX1XX" 顯示
4. 利用遙控器上的方向鍵, 按左或按右來修改選擇你想要的區碼
5. 選定區碼後, 按下 'SETUP' 回到主螢幕
6. 收工