引用osx86論壇中ZildjianKX的發言：
Actually, there is a much easier way I found, since pretty much the above didn't work for me in the end (just a blank screen the first time it booted).
Install Tiger as normal, use the included Disk Utility to partition and format the disk.
Download the following ISO:
http://www.9down.com/downloads.php?fileid=288
Hiren's BootCD v7.8
After Tiger installs and reboots and you get the b0 error, load the above ISO and boot into it. From the menu, select MBR tools and choose Boot Magic. Follow the prompts and it should boot you into Tiger.
也就是說，先去上面那個網址下載Hiren's BootCD v7.8，然後把你在vmware中安裝osx的硬碟設為啟動碟，就不會出現這個錯誤訊息了。
試試看吧!