|
*停權中*
您的住址: On The Tramroad
文章: 2,947
|
引用:
Originally posted by 無心人
What's 4x <Normal> / <Boost>?
|
呃...搞錯了
這是在4倍CDR燒錄下才能使用的功能
Normal設定下燒錄功能為TEAC預設
Boost設定下,將會以較強的雷射功率在較短的時間內完成
但是Boost可能增加造成error的機率
引用:
CD-R (4X) strategy
----------------------
The write state will be changed by varying the laser power and its radiation duration of the drive. As a result, the sound quality or read performance may fluctuate depending on the congeniality of the media and the drive. The change may work better or worse. It is impossible for TEAC to make a verification as it depends on the congeniality of the media and the drive. Changing the settings is your own responsibility.
These settings function only for the CD-R media and only when the write setting is 4X speed. Set the write speed to 4X using a writing application.
<Normal>
Default settings adjusted by TEAC
<Boost>
The media is written with stronger laser emission in a lesser time than those of the normal settings.
* Normal is selected in the default settings.
* Note in advance that some effects may not be noticeable or a side effect such as increasing errors may result when Boost is selected.
|
|