瀏覽單個文章
fsaa3dfx
Elite Member
 
fsaa3dfx的大頭照
 

加入日期: Apr 2004
文章: 14,365
引用:
作者chrisdar
#1的錯誤
DDR2-667 並不是指DDR2跑666.66MHz應該是333.33MHz喔
這個錯誤到後篇已經有修正過來

還有FSB(HTT)的單位是MT/s
INTEL(FSB):1066MT/s(266MHz by QDR)
AMD(HTT):1600MT/s(800Mhz by DDR)、2000MT/s(1000Mhz by DDR)
這個錯誤一直到#24還是沒有改過來

PS:
Definition of: MT/sec
(MegaTransfers per SECond) A measurement of bus and channel speed in millions of "effective" cycles per second. MT/sec is a rating of the actual, delivered speed rather than the speed of the interface clock. For example, if timing is derived from both the rising and falling edges of a clock cycle rather than one complete cycle, the effective rate is doubled: a 400 megahertz (MHz) clock yields 800 megatransfers per second (MT/sec). In this case, using 800 me...


感謝您的提供補正 順便請教一下chrisdar兄

#1的錯誤 是指哪裡 煩請提點 小弟在筆記做個修正

DDR2-667 並不是指DDR2跑666.66MHz應該是333.33MHz喔 <---您說這句一開始哪有錯誤呢@@ 又是在哪修正一下子搞糊塗了

對了那個QDR是不是之前常說的 Intel 四倍頻 規律呢? (也就是前測匯流排)?

煩請chrisdar兄可以多補充說明一下否

以及這篇是否有錯誤之處 也煩請指證
舊 2006-08-24, 03:48 PM #34
回應時引用此文章
fsaa3dfx離線中