引用:
|
作者clinsman
開機不會停住....
整個用起來的感覺......就像是插了原廠的256M RAM一樣....
(請大家忽略掉BIOS ECC欄位是No這件事情....雖然顯示No...可是開機起來以後完全正常)
圖的部分...........好ㄅ...
有圖有真相...但是我無法拍BIOS的畫面,因為相機不在身邊...
可以貼幾張everest圖給大家看看....
|
看起來的確有問題..
以CPU-Z來說:Correction(修正項目)欄應該顯視[ECC]而不是Parity
ECC與Parity
http://cweb.msi.com.tw/program/serv....php?SERIALS=71
找到這個
http://www.simmtester.com/page/news...+Table+&num=101
Understanding DDR Serial Presence Detect (SPD) Table
跟ECC相關的幾個bit
Byte 6 Module Width of this assembly
Byte 11 DIMM Configuration Type <-?
This is to identify the DIMM as ECC, Parity, or Non-parity. Normally non- parity is related to 64 bit module, Parity and ECC are related to 72 bit or higher memory bit width on the module.
==>Non ECC 00h / ECC 02h
Byte 14 Error Checking SDRAM Width
嗯~以上純屬外行人講內行話!!