出了最新的2005.11.28
http://www.prolific.com.tw/support/...07B_d112805.zip
Latest Release Date Version: 2005.11.28.148 [Checksum 5748]
Changes on this update:
1. Fixed BENQ DW-1640 ODD Burn Verify issue. [USB/1394]
==========================
Revision History:
09/06/2005 -
1. Add 1 sec timeout while consuming BulkOut data to re-solve HP640 lightscribe issue. [USB]
2. Add 067B to ATACB_EXECUTE command. [USB]
3. Set IDE_word_per_sector while initilizing device rather than in MS() routine. [USB]
4. Enhance 16X ODD. [USB]
5. Add suspend_indicator in START_STOP command to support device power on/off at MacOS. [USB]
6. Fix possible error in vendor-specific command routine. [USB]
7. Fix SPB issue in PIO_Protocol routine. [USB]
8. CSWResidue becomes global variable. [USB]
9. GetStatus() changes to busPowered variable rather than SelfPower variable. [USB]
10. New suspend_indicator functions. [USB]
11. Fixed the suspend failure when ODD has no disc on iMac G5-Tiger. [1394]
--------------------------------
01/07/2005 -
1. Fix MagicStor 4GB CF cannot be recognized and write data in PIO Mode. [1394]
- enable PIO mode support for MagicStor CF and fix firmware initial routine.
--------------------------------
12/09/2004 -
1. Fix BenQ DW800A ODD cannot be detected in Slave Mode. [1394]
--------------------------------
11/09/2004 -
1. Fix daisy-chain issue error when doing simultaneous HDD large file copy & DVD burning. [1394]
--------------------------------
10/18/2004 -
1. Fix IOmega Automatic Backup software issue. [1394]
- This issue is due to the calculation error of data length.
--------------------------------
10/06/2004 -
1. Add hardware protection for flash updating (ATMEL, SST, and PMC). [1394]
2. Add Check Word to GET_CHIPINFO, ERASE_FLASH, WRITE_FLASH, READ_FLASH, and SENSE_CMD. [USB]
3. Add LOCK/UNLOCK FLASH command (with hardware lock) to restrict ERASE_FLASH and WRITE_FLASH. [USB]
4. Add hardware lock to flash for firmware update (ICP) function. [USB]
Note: You must use ICP AP v2.2 if you are updating to firmware date 10/06/2004 and earlier.
--------------------------------
09/22/2004 -
1. ICP function: support new FLASH - EM39LV010. [USB]
2. Mutiple buttons support (for One Touch Button application) for Windows. [USB]
3. Fix Windows XP+SP2 with VIA 1394 host. [1394]
4. Fix IDE identify device on boot. [1394]