你on-chip-sata設為manual
x sata port0 configure as 只能設為"sata port 1"

若設為ide primary slave則下面那個sata port1 configure as會變成ide primary master ; 若設為ide secondary slave則下面那個sata port1 configure as會變成ide secondary master , 兩種設法均會蓋掉原先的IDE HD or DVD-ROM

似乎設為SATA PORT1是唯一選擇

若還不行的話把DVDROM改接到IDE Primary Slave
再把SATA configure as "IDC Secondary Master"試試

怪哉.........設為SATA PORT 1且Standard CMOS由IDE2 顯示抓到SATA碟應該是正常的啊.........難道Seagate SATA1/SATA2 auto-detect有問題

8IK1100 v2.0 只有SATA 1 .....

過些日子也想買一棵200 or 250G 7200.9 SATA2當DATA Disk.........難道8IK1100真不支援???
(俺也是用8IK1100 Ver2.0 只是用不支援RAID的win2000)

SoSo123再試試吧..........不行要報一下說