已經Patch過 includes a SSE3 to SSE2 patch and others hacks
可以直接燒成dvd的安裝iso檔
相信安裝tiger可以像是安裝ｘｐ一樣簡單
網址如下　
http://thepiratebay.org/details.php?id=3377799



-----------------------------------
Requirements:

== SSE2 *OR* SSE3 processor == please note this aspect before continuing on.
Upon installing the software, choose Custom install and if you have an SSE2
processor leave the SSE2 Hacks enabled; if you have an SSE3 processor just
uncheck the SSE2 Hacks box and the proper patches will be applied for your CPU
and its capabilities. As far as hardware goes, the more variety the better.
Intel, AMD, etc etc... whatever you can install it on will help to improve it
and make the generic portions better (we hope). So keep us posted at the email
address above, please.

== The Marklar-Tiger.dmg file or the Marklar-Tiger.iso file == If you have the
.dmg (the original file distributed a few weeks ago), then you can use UltraISO
to convert it to .iso format because that's what this patch will be applied to.
It's the original Developer Transition Kit DVD that's floating around now. No,
we won't tell you where to get it, you're on your own in that respect.

== The patches and files included in this archive == This READ_ME_FIRST.txt file
along with the other files are all you need other than the Marklar-Tiger file
noted above.

Step 1
------

If you have the Marklar-Tiger.dmg file as noted above, you're going to have to
use UltraISO to convert it to an ISO format file, standard .iso extension. Takes
a few minutes on most machines. Get UltraISO at www.ultraiso.com, install it,
then run it. Choose Tools - Convert and click the "..." to browse for the
Marklar-Tiger.dmg file. Select it, click OK, and then you'll need to specify the
target filename. The .dmg file is roughly 2.6GB but the .iso will be 4GB almost
on the nose when the conversion is complete so make sure you have ample drive
space to accomodate these files.

Step 2
------

Extract the Generic_OSx86_Install_DVD_Patcher_test3.rar file into it's own
directory. Inside that archive are:

- The Bender-Marklar-Tiger-patch-Test3.ppf (this is the actual binary patch file
so be careful with it)
- PPF-O-Matic, the application used to apply the binary patch against the
Marklar-Tiger.iso file you just created with UltraISO (or already had, maybe)
- A Windows-based md5 verification tool. If you're using Linux you're on your
own in that respect since I don't have enough experience using md5 checksums and
creators under Linux, sorry. Besides, if you run Linux you *should* already know
how to do that stuff, right? smile.gif
- This READ_ME_FIRST.txt file. So read it several times if necessary.

Once the files are extracted to their own directory, I would STRONGLY suggest
you run the md5_Summer program to calculate an md5 checksum from your Marklar
Tiger.iso file. If the md5 doesn't match, the entire patching process will fail
no matter what you do. Consider yourselves warned.

The md5 for the Marklar-Tiger.iso file is:

e78fe52e30a1f8c5b29d4b7932a16c5e

If that checksum matches the checksum generated by md5_Summer against your
Marklar-Tiger.iso you're all set.

Step 3
------

Run the ppf-o-matic3.exe file and on the screen that appears, locate your
Marklar-Tiger.iso file where requested.

Then load the Bender-Marklar-Tiger-patch-Test3.ppf in and it'll give you some
notes before you apply the patch. I STRONGLY suggest (I do that STRONGLY suggest
thing a lot, it comes from experience when dealing with this kind of stuff) that
you read those notes. bender12 wrote them for a reason and I've basically
repeated them here for Pete's Sake. Read his notes also before proceeding.

PLEASE NOTE: One little bug in his notes there are that SSE3 isn't capable when
actually it is. As noted above, if you have an SSE3 processor and you choose the
Custom installation method, just uncheck the SSE2 Hacks box and the proper SSE3
support will be enabled. Simple.

Once you're ready to rock, click Apply and wait for the patch to be applied.
When it's done, move on to...

Step 4
------

When the patch is applied PPF-O-Matic will inform you what to do. Basically,
burn that sucker and install OSx86 nice and clean. You're on your own from here
on out. Please pay careful attention to the way OSx86 installs - it needs
someplace to be installed do obviously so if you don't have the partitions set
up or you're not installing clean to a totally blank hard drive (and why aren't
you? It's the best possible method, you know) then you stand a chance of wiping
out necessary partition information - you could end up almost losing data as I
did.

/me thanks some higher power for True Image and Easy Recovery... I recovered
everything...

That pretty much does it for this version of the READ_ME_FIRST.txt file. Future
versions of the patch may refine the installation, improve the speed issues (if
you even notice them), fix hardware incompatibilities and other things.
__________________