瀏覽單個文章
tester2
Basic Member
 

加入日期: Feb 2005
文章: 18
引用 EntFun.COM 娛樂滿紛 » 影音數碼講 dondon Comment:

* Colour is too sharp for default setting. (Need fine tune)

* Watching ordinary TV, almost the same quality with other 37" LCD TV (including SHARP). A line doubler should be added or you need to keep your eyes 2m aways from the screen.

* Watching DVD with provided 色差線 -> Good quality, BUT, the tv always treat my wide screen aspect DVD as 4:3 aspect. Therefore when watching at full/wide screen mode, 黒邊 appears on the upper & lower screen (but no distortion).

* Important!! The TV set doesnt's have a true power on/off switch. Once the cord is plugged, it turns to Standby mode immediately ( = power off mode by remote control).
You need to unplug the socket for true power off. (No spec available from the manual about the power consumption at standby mode)

* This TV cannot handles 4:3 sources properly --- just simple, Only upper and lower portions are cut and the rest is enlarged to fill into the panel without image distortion. THUS, ONLY half of "字幕" can be seen.
舊 2005-08-18, 10:09 PM #4
回應時引用此文章
tester2離線中