剛剛用SPEC Viewperf 7.1 測了一下
6200軟改後的fx540
Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 17.54

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 56.66

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 54.05

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 19.78

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 24.88

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 22.38

原本的6200 未軟改
Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 12.66

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 56.43

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 53.30

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 13.25

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 14.07

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 7.276


呵呵數據差滿多的基本上我覺得以經成功了
因為在跑的時候未軟改的6200 真的很慢有些圖好像轉不動@@

但軟改後的6200 變成fx540 真的順很多

有用maya的朋友可以改看看 這樣真的省了 一半的價格

軟改後我只給它開4管不知道開八管效能還能不能提升

nv應該白癡吧 不然不會停產a2