瀏覽單個文章
vince1111
New Member
 
vince1111的大頭照
 

加入日期: Oct 2001
文章: 6
幫我看看我的青雲 5900PV 是出了什麼問題!

只要我玩天堂2或獵殺潛航3時,過沒多久就會當掉(出現下面英文訊息)
而且重開機後就沒任何的畫面,必須到安全模式下把顯示卡的驅動程式重新安裝
而且必須灌較新或較舊版本的驅動程式,如果還是灌相同版本,還是無法正常開機
主機板的驅動程式、BIOS都更新了!電腦也重灌了,還是會發生這個問題!
有沒有人知道問題出在哪呢?

顯示卡平常溫度:
GPU核心溫度:45
環繞溫度:38

顯示卡玩遊戲時溫度:
GPU核心溫度:53
環繞溫度:42

CPU:Intel Pentium 4 2.60 GHz
RAM:Kingston 512 DDR 400
主機板:MSI 865PE NEO 2
顯示卡:青雲 FX5900PV
http://taiwan.albatron.com.tw/page/...n.asp?pro_id=67
POWER:HEC 335W
HDD:SEAGATE 120GB SATA
燒錄機:Pioneer A09
光碟機:Liteonit 16X


check to make sure any new hardware or software is propely installed.
If this is a new istallation, ask your hardware or software manufacturer
for any windows updates you might need.

Run the driver verifier against any new (or suspect) drivers.
If that doesn't reveal the corrupting driver, try enabling special pool.
Both of these features are intended to catch the corruption at an earlier
point where the offending driver can be identified.

If you need to use safe Mode to remove or disable components,
restart your computer, press F8 to select Advancend Startup Options,
and then select safe Mode.

If this is the first time you've seen this stop error screen,
pestart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware
of software. Disable BIOS memory option such as caching or shadowing.
If you need to use sate Mode to remove or disale components, restart
your computer, press F8 to select Advanced Startup Options, and
the select safe Mode.
     
      
舊 2005-05-08, 03:46 PM #1
回應時引用此文章
vince1111離線中