已知限制為目錄與檔名不可為中文..
使用的檔案是winDVR3.0 +m350 直接選NTSC-DVD 產生出來的mpg2 檔
load mpg 也ok....在編輯的時候 ..是原本就沒有聲音嗎?
load 一般的mpg1 的檔案，在編輯的時候卻有聲音...
不曉得正不正常...mpg2 在編輯播放的時候想聽到聲音，是否有需要特別設定?
還有是否有試用過他的tool Dr.M
這好像是用來檢測mpg 檔是否合法...
把剛錄好的mpg2 直接拿下去測..

回報結果如下...
Examination for G:\capture\0118013313.mpeg
==========================================
Looking for missing or duplicate frames
and for incorrect GOP and sequence headers.
Verifying timestamping and TimeCode values in GOPs.
Checking that the mux rate and bit rate are within 10%
of claimed mux rate and bit rate respectively.
Looking for non-mpeg bytes before the first startcode
and after the last startcode.
Verifying that the MPEG starts with a Sequence Start,
and ends with a Sequence end.
===
* GOP (00:29:58:10) is missing 2 frames
* Claimed video bitrate is 9799600 but the real bitrate is 7376945
(more than 10% diff)
* Claimed mux rate is 10080000 but the real bitrate is 7945882
(more than 10% diff)


發覺GOP 少兩個frame....?
bitrate 也有問題 .? 超過10% 的限制?
這是在還沒經過剪輯的情況.....

不曉得有沒有人用過這類的檢測工具來測試.....
還是有其他的工具來測咧.?
後續應該也會用 m2-edit pro 來作處理..
怕用tmpgDVD author 燒到DVD 會產生問題..
請教一下..