燒錄錯誤訊息如下...請問哪個大大能幫我解說一下....一直燒不起來耶....殘唸.....
oil
1A20-0217-0000-1286-0943-5455*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/6/17 下午 09:25:04
Nero版本: 6.0.0.20 (Nero Express)
燒錄器： <ASUS CRW-5232AS> 版本: 1.01 - HA 1 TA 0 - 6.0.0.20
界面卡驅動程式： <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS CD-S500/A >版本: 1.5D - HA 0 TA 1 - 6.0.0.20
界面卡驅動程式： <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S500/A atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
ASUS CD-S500/A E: CDRom0
ASUS CRW-5232AS F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 639MB (654880kB)
Free physical memory: 402MB (412336kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.1.2005
CD-ROM(ISO)
下午 12:30:20 #1 Text 0 File Isodoc.cpp, Line 5954
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
下午 12:30:20 #2 Phase 97 File dlgbrnst.cpp, Line 1843
啟動FlextraLink
下午 12:30:20 #3 Text 0 File Reader.cpp, Line 118
Reader running
下午 12:30:20 #4 Text 0 File Writer.cpp, Line 127
Writer ASUS CRW-5232AS running
下午 12:30:20 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
下午 12:30:20 #6 Text 0 File Burncd.cpp, Line 3213
Turn on 軌道一次燒錄(TAO), using CD-R/RW media
下午 12:30:20 #7 Text 0 File DlgWaitCD.cpp, Line 233
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 135792 (30:12.42)
下午 12:30:20 #8 Text 0 File DlgWaitCD.cpp, Line 238
Write in overburning mode: FALSE
下午 12:30:20 #9 Text 0 File DlgWaitCD.cpp, Line 1997
Recorder: ASUS CRW-5232AS;
CDR code: 00 97 28 12; OSJ entry from: GIGASTORAGE CORPORATION
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
下午 12:30:20 #10 Text 0 File DlgWaitCD.cpp, Line 398
>>> Protocol of DlgWaitCD activities: <<<
=========================================
下午 12:30:20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 772
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 135793 (135793) = #135793/30:10.43
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 135791 blocks [ASUS CRW-5232AS ]
--------------------------------------------------------------
下午 12:30:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare recorder [ASUS CRW-5232AS ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 278411264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
135793 | lead-out | 1 | 0x00 | 0x41
下午 12:30:20 #13 Text 0 File ThreadedTransferInterface.cpp, Line 968
Removed 2 run-out blocks from end of track 1.
下午 12:30:20 #14 Phase 24 File dlgbrnst.cpp, Line 1843
檔案暫存作業開始
下午 12:30:20 #15 Phase 25 File dlgbrnst.cpp, Line 1843
檔案暫存作業完成
下午 12:30:20 #16 Phase 28 File dlgbrnst.cpp, Line 1843
速度測量開始
下午 12:30:20 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2153
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
下午 12:31:30 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
下午 12:31:30 #19 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
下午 12:31:30 #20 Phase 29 File dlgbrnst.cpp, Line 1793
速度測量已完成：37.1x (5,568 KB/s)
下午 12:31:30 #21 Text 0 File Burncd.cpp, Line 4244
燒錄將以 24x 倍速進行，
因為讀取的速度太慢，燒錄器無法跟上 48x 倍速。
下午 12:31:30 #22 Phase 32 File dlgbrnst.cpp, Line 1843
以24x (3,600 KB/s)的速度開始模擬燒錄
下午 12:31:30 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2153
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
下午 12:31:30 #24 Text 0 File Mmc.cpp, Line 19251
Set BUFE: FlextraLink -> ON
下午 12:31:34 #25 SCSI -1024 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
下午 12:31:34 #26 CDR -1024 File Writer.cpp, Line 335
通訊失敗
下午 12:31:34 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
下午 12:31:34 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
下午 12:31:42 #29 CDR -201 File WriterStatus.cpp, Line 152
寫入狀態無效
ASUS CRW-5232AS\H1 T0
下午 12:31:42 #30 TRANSFER -18 File WriterStatus.cpp, Line 152
無法執行結束軌道
下午 12:31:42 #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
下午 12:31:42 #32 Phase 34 File dlgbrnst.cpp, Line 1843
以24x (3,600 KB/s)的速度模擬燒錄失敗
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86656 bytes, created 2001/10/10 下午 07:05:10 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)