剛剛忘了關掉垂直同步模式,再測一次

測試配備

ABIT NF7S ver 2.0
Barton 2500+ @ 2450mhz (222 x 11)
DDR400@DDR444 512Mb X 2 (9-3-3-2.5)
Seagate 梭魚7 200G
Leadtek GF6800 GT/256M DDR3 @410/1100
Zippy 500W power

----------------------------------------------------

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-03 Weighted Geometric Mean = 26.07

---------- SUM_RESULTS\CATIA\SUMMARY.TXT
catia-01 Weighted Geometric Mean = 19.01

---------- SUM_RESULTS\ENSIGHT\SUMMARY.TXT
ensight-01 Weighted Geometric Mean = 23.86

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-07 Weighted Geometric Mean = 21.35

---------- SUM_RESULTS\MAYA\SUMMARY.TXT
maya-01 Weighted Geometric Mean = 34.25

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-03 Weighted Geometric Mean = 25.85

---------- SUM_RESULTS\SW\SUMMARY.TXT
sw-01 Weighted Geometric Mean = 17.83

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-04 Weighted Geometric Mean = 40.03

--------------------------------------------------------
ugs-04 是未softmod的10倍多

不知道是因為k7系統的關係,還是softmod有問題

pro/e的測試項目跟http://www.spec.org/gpc/opc.data/vp8/summary.html測試差一大截,約少了15~25左右

其他的項目就還算正常範圍內