主題: NEC-3500A燒CD-R及CD-RW
瀏覽單個文章
戰區88
Advance Member
 
戰區88的大頭照
 

加入日期: Apr 2002
文章: 384
Red face
試過各版的韌體,還是不成功,看來要到捷修網報到了..
以下是參考log..
**********************************************************
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 17.0 Hpt3xx2K Port 0 ID 0 DMA: Off
OtherPeripheral : HPT RCM DEVICE Hpt3xx2K Port 0 ID 0 DMA: Off
DiskPeripheral : ST340823A 3.54 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : DVD-ROM 16X 5.FV nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3500AG2.16 nvidesm Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG H: CDRom4
AXV CD/DVD-ROM G: CDRom2
DVD-ROM 16X E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 171MB (175236kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.12.2004
CD-ROM(ISO)
下午 03:37:22 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 2 (Max. of 31 chars)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

下午 03:37:22 #2 Text 0 File Burncd.cpp, Line 2866
_NEC DVD_RW ND-3500AG
防燒壞保護 已啟動

下午 03:37:22 #3 Text 0 File Reader.cpp, Line 127
Reader running

下午 03:37:22 #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3500AG running

下午 03:37:22 #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

下午 03:37:22 #6 Text 0 File Burncd.cpp, Line 3151
Turn on 光碟一次燒錄(DAO), using CD-R/RW media

下午 03:37:22 #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 335924 ( 74:40.74)
Last address to be written: 261720 ( 58:11.45)

下午 03:37:22 #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD DVD)

下午 03:37:22 #9 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-3500AG;
CDRW code: 00 97 27 10; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

下午 03:37:22 #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

下午 03:37:22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 ()
2 indices, index0 (150) not provided
original disc pos #0 + 261721 (261721) = #261721/58:9.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 261721 blocks [_NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

下午 03:37:22 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 615920592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
261721 | lead-out | 1 | 0x41 | 0x00

下午 03:37:22 #13 Phase 24 File dlgbrnst.cpp, Line 1832
檔案暫存作業開始

下午 03:37:22 #14 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

下午 03:37:22 #15 Phase 25 File dlgbrnst.cpp, Line 1832
檔案暫存作業完成

下午 03:37:22 #16 Phase 32 File dlgbrnst.cpp, Line 1832
以4x (600 KB/s)的速度開始模擬燒錄

下午 03:37:22 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

下午 03:37:22 #18 Text 0 File Mmc.cpp, Line 16285
StartDAO : CD-Text - Off

下午 03:37:22 #19 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON

下午 03:37:22 #20 Text 0 File Mmc.cpp, Line 16572
CueData, Len=32
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 aa 01 34 00 3a 0b 2e

下午 03:37:32 #21 SCSI -500 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04210000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x01 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

下午 03:37:36 #22 SCSI -1064 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04BB1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x01 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02

下午 03:37:36 #23 CDR -1064 File Writer.cpp, Line 311
無效的區塊位址

下午 03:37:36 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

下午 03:37:36 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

下午 03:37:42 #26 SCSI -500 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

下午 03:38:00 #27 SCSI -500 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03C922B8
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

下午 03:38:00 #28 CDR -500 File WriterStatus.cpp, Line 167
SCSI 指令終止
_NEC DVD_RW ND-3500AG\H1 T1

下午 03:38:00 #29 TRANSFER -24 File WriterStatus.cpp, Line 167
無法進行光碟一次燒錄的結束動作

下午 03:38:18 #30 SCSI -500 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03C922B8
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

下午 03:38:19 #31 CDR -500 File WriterStatus.cpp, Line 172
SCSI 指令終止
_NEC DVD_RW ND-3500AG\H1 T1

下午 03:38:19 #32 TRANSFER -39 File WriterStatus.cpp, Line 172
無法執行結束動作

下午 03:38:22 #33 Phase 34 File dlgbrnst.cpp, Line 1832
以4x (600 KB/s)的速度模擬燒錄失敗


Existing drivers:
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 2002/11/13 下午 03:10:00 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 上午 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
**********************************************************
p.s.我用的是digimaster A+ 48x (燒壞不少片,因為是在最內圈有同心圓的狀況,等到發現時已經屍骸遍野了...)
舊 2004-12-12, 03:49 PM #5
回應時引用此文章
戰區88離線中