http://club.cdfreaks.com/showthread...5&page=13&pp=25
Re: CDSpeed v3 Disc Quality Test
--------------------------------------------------------------------------------
Quote:
Originally Posted by MediumRare
As a frugal person, I wanted to try the new data disc option with a rewritable and ran into a problem. CDSpeed apparently detects the disc as a DVD with capacity 0 ( ) and almost all options are grayed out:
Code:
Manufacturer : Verbatim
Code : MKM A02
Disc Type : DVD+RW
Usage : General
Recording Layer : -
Recording Speed : 4 X
Capacity : -
Additional Capacity : -
Overburn Capacity : -
錸︰ CDSpeed v3 光碟質量檢驗
--------------------------------------------------------------------------------
報價︰
最初透過MediumRare公佈
節儉人，我想要那些新選擇光碟數據有一重寫並且跑進問題。 CDSpeed 顯然識別那些光碟作為0加能力的DVD()和幾乎所有選擇被在外變成灰色︰
代碼︰
製造商︰ 逐字
代碼︰ MKM A02
盤式︰ DVD+RW
用法︰ 一般
記錄層︰ -
記錄速度︰ 4 X
能力︰ -
另外的能力︰ -
Overburn 能力︰ -
http://people.freenet.de/gfhgpage/c...+RW_options.png
I'm running a LiteOn SOHW-1213S@1633S (BS0H) and have deactivated auto-bitsetting in case this makes a difference. Both KProbe2 and Nero (6.3.1.15) show disc and book type as DVD+RW. This is independent of doing a prior full or quick erase.
As far as I can tell, this behaviour was already present in v3.30 but not in v.3.10.
Any suggestions?
G
Can you please tell me if you erased the disc and which program you used for that?
I've seen this behaviour with DVD+RW discs which were erased with InCD.
If you erase the disc with Nero CD-DVD Speed (Extra->Erase Disc) then it should work fine.
__________________
我正運轉一LiteOn SOHW-1213S@1633S(BS0H)，已經解散汽車bitsetting，以防這產生影響。 KProbe2和尼羅(6.3.1.15)都顯示光碟和書類型為DVD+RW。 這不倚賴做一早先深濃或者迅速擦掉。
就我能告訴而言，這行為已經存在于v3.30但不是在v. 3.10。
有建議嗎？
G
你能告訴我是否你擦掉這個光碟，並且你用于那哪個計畫嗎？
我已經用被InCD 擦掉的DVD+RW 光碟看見這行為。
你擦掉與(額外>的尼羅CD DVD速度一起的光碟如果擦掉光碟)那么，會工作好。
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Re: CDSpeed v3 Disc Quality Test
--------------------------------------------------------------------------------
Quote:
Originally Posted by starless
Hi, Erik
I had the same problem with PioData DVD+R DL,too.
http://home.kimo.com.tw/kittystarki...ta_PI_error.png
錸︰ CDSpeed v3 光碟質量檢驗
--------------------------------------------------------------------------------
報價︰
最初透過無星公佈
喂，艾利克
我也有有PioData DVD+R DL的相同的問題。
http://home.kimo.com.tw/kittystarki...ta_PI_error.png
I had test it two times and get the same error message at the same point.And also the disc's surface scan and speed test look good.
But what is interesting and strange, I had successfully run over the test with MKM DVD+R DL before.
我有測試天氣二倍並且得相同錯誤訊息在相同point.And也光碟表面掃描和速度考試看好。
但是有趣和奇怪的，我以前已經成功帶著MKM DVD+R DL 超過試驗。
http://home.kimo.com.tw/kittystarki...-2004_08_15.png
?
I don't think I've seen this error before but everything should work fine with version 3.40 because it uses a completely different scanning method for BenQ drives.
__________________
我不認為我看見這錯誤以前所有東西能與版本3.40一起工作好天氣使用給BenQ的一種完全不同的掃描方法駕駛。
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Re: CDSpeed v3 Disc Quality Test
--------------------------------------------------------------------------------
Quote:
Originally Posted by Jamos
I am getting this error randomly on certain disks scanning with Benq 822A..this is AML002 media it randomly pops up usually after a few minutes. using CDSpeed 3.40
I'm not sure what could cause this problem but I will check it.
錸︰ CDSpeed v3 光碟質量檢驗
--------------------------------------------------------------------------------
報價︰
最初透過Jamos公佈
我得這錯誤隨機在肯定磁片掃描與Benq 822A..this一起上隨機突然跳出通常在幾分鐘之后的AML002 媒介。 使用CDSpeed 3.40
我不能確信什麼能引起這個問題，但是我將檢查它。
Re: CDSpeed v3 Disc Quality Test
--------------------------------------------------------------------------------
Quote:
Originally Posted by Flash56
>ErikDeppe
I was eager to try out the new 3.40 on my BenQ DW1620 but came across a known bug in the software that prevented me from accessing the drive.
I have a large tower with 12 optical DVD drives in it and CD/DVD speed will only report 9 drives maximum so the BenQ drive and 2 others do not appear in the drop down list. All these drives are on PCI IDE controllers except for the BenQ & a Liteon DVD-ROM which are connected to the internal IDE and they all function correctly with my burning softwares as well as DVDInfoPro.
A workaround for this is for me to disable one of my controllers and reboot the system so I have only 8 drives present & then the CD/DVD Speed will then see the missing drives. As you can imagine this is inconvenient because I then need a reboot to re-enable the missing drives and the drive letters have changed from the ones I had originally assigned them together with their scsi ID which usually means a regedit to set them back to how I like them
Please can you look into this and fix the software so that it will recognise more than 9 optical drives in the one PC.
NB. This problem has not just developed with the latest version it was apparent with earlier versions but this time I decided to report it to you.
Thanks for letting me know.
Nero CD-DVD Speed supports up to 128 drives.
However it only checks the first 8 controllers. Do you have more than 8 controllers?
錸︰ CDSpeed v3 光碟質量檢驗
--------------------------------------------------------------------------------
報價︰
最初透過Flash56公佈
>ErikDeppe
我渴望在我的BenQ DW1620上試用新3.40， 但是在阻止我訪問運動的軟體裡偶然發現一個知名的缺陷。
我有有在它和CD / DVD速度裡的12個光學的DVD驅動器的一座大的塔 只將報告9 運動最大因此BenQ 運動和其它2不在下拉式目錄裡出現。 除了BenQ和Liteon DVD-ROM，所有這些運動在PCI艾德控制單元上， 與我燃燒的軟體以及DVDInfoPro 正確連接內部的艾德和他們全部功能。
這的一種變通辦法是我傷殘我的一位控制人員並且重新啟動系統， 我只有8行程給和然後CD / DVD速度于是將看見丟失的行程。 因為你能想像，這是不方便的， 因為我然後需要重新啟動重新授權給丟失的運動和驅動器號 已經從我最初已經分發他們以及通常表示regedit 對我怎樣喜歡他們阻止他們的他們的scsi ID的改變
請你能調查這並且修理軟體，以便它將認出超過在一個PC機的9台光驅。
NB。 這個問題沒剛剛用最新的版本發展用更早期的版本明顯，但是這次我決定把它報告給你。
感謝讓我知道。
尼羅CD -DVD速度支持直到128 運動。
但是它只檢查前8位控制人員。 你有超過8位控制人員嗎？
Re: CDSpeed v3 Disc Quality Test
--------------------------------------------------------------------------------
Quote:
Originally Posted by Halcyon
You certainly have your hands full, Erik! So many drives, so many phantom problems, requests, etc.
If there's anything us users can do, except keep on asking for features and testing for drive related bugs, please don't hesitate to ask.
Your software is such a useful tool that I'd like to help in any way I can.
Thanks for the comments
Feedback from you and others has been very valuable
錸︰ CDSpeed v3 光碟質量檢驗
--------------------------------------------------------------------------------
報價︰
最初透過平靜公佈
你當然忙得不可開交，艾利克﹗ 那么多運動，那么多幻影問題，請求，等等
有任何東西我們用戶能做如果，除了繼續要特徵並且適合駕駛測試有關的缺陷，請一定要求。
你的軟體是一件如此有用的工具以致于我想無論如何幫助我能。
感謝那些意見
來自你和其它人的回饋非常有價值