http://club.cdfreaks.com/showthread...85&page=9&pp=25
Quote:
Originally Posted by totos
Hi! May I ask Eric (CDDVDSpeed creator) or anyone who knows why the Plextor PX-712A is not supported? I read that Plextor company does not cooperate...
Forgive me if I am wrong, but is this needed? I mean since the drive supports error reporting, isnt that possible for the software to communicate this data to the application?
What is the Plextor cooperation needed for? Is there any permission needed by them?
I hope I see this superb utility for Plextor as well
Thanks for the comments
To add support for Plextor drives (or other drives) permission is needed.
But unfortunately Plextor prefers to have the PI/PO testing function in PlexTools only.
報價︰
最初透過totos公佈
喂﹗ 我可以問艾利克(CDDVDSpeed 創造者)還是知道Plextor PX-712A為什麼沒被支持的人？ 我讀Plextor 公司不合作 ...
如果我錯誤，但是這被需要，原諒我嗎？ 我意思是自從報告的行程支持錯誤，可能適合軟體交流這數據給應用的isnt？
Plextor 合作被需要為什麼？ 有許可被他們需要嗎？
我希望我也看見Plextor的這壯麗的效用
感謝那些意見
補充說對Plextor的支持推展(或者其他運動)許可被需要。
但是令人遺憾Plextor喜歡在PlexTools裡只有PI / 郵電亭測試函數。
Quote:
Originally Posted by johnzap
Any chance of adding support also for the Asus DVD-E616? Or is it not on the horizon?
Another question: is it likely that the NEC drives, e.g. 3500, will eventually be added to the list of supported drives?
Thanks for a great program!
I will ask Asus if the old version of the DVD-E616 is supported.
As for NEC, well they said they don't have any plans to add support for PI/PO testing but who knows
報價︰
最初透過johnzap公佈
有為Asus DVD-E616也增加支持的機會嗎？ 還是它不即將出現？
另一個問題︰ 作天氣可能那些NEC 駕駛，例如3500，被增加給目錄那兒被支持將最終駕駛？
感謝一個重要的計畫﹗
如果DVD-E616的舊的版本被支持，我將問Asus。
至於NEC，好他們說他們沒有任何計畫增加測試的對PI / 郵電亭的支持，但是誰知道
Quote:
Originally Posted by totos
Thanks Eric for your reply
I now understand... You know, I thought that no permission was needed...
E.g. Ahead should ask all the drive manufacturers to agree that the Nero will support writing for their drives? If yes this is crazy...
I thought that since the drive supports error reporting, and the customer pays for it not Plextor, anyone could write a software for passing the drive info to the PC display... What is illegal about this, since they offer the error reporting anyway?
And something else...Is the Pioneer DVR-108 supported?
Regards
Each manufacturer uses its own vendor-specific (= undocumented, Top Secret ) command to return PI/PIF.
So to get the support from a manufacturer they have to give the technical docs as well as the permission to use this command.
I don't know if it would be illegal to use the command if it was retrieved from a different source but it's always a good idea to keep good relations with the drive makers
For all other functions no support/permission is needed because standard commands are used.
Pioneer drives are not yet supported.
報價︰
最初透過totos公佈
感謝艾利克你的答覆
我現下理解 ... 你知道，我思考那個不需要許可 ...
例如在前面應該問的全部行程同意尼羅將支持適合他們行程寫的製造商？ 如果是這發瘋 ...
我從運動支持錯誤報告起思考那個， 用戶把Plextor不支付給它，任何人能寫適合度過訊息給PC 展示的行程的一軟體 ... 關於這不合法的，他們提供不論如何報告的錯誤？
並且其它事情開發者DVR 108？
看
每製造商使用它自己賣主具體(未經證明的=，絕密)返回PI / PIF的命令。
得支持從他們必須給技術文件和使用這命令的許可的一製造商。
我不知道， 如果使用命令將是不合法的， 如果它被從一個不同的來源挽回，但是保持與運動製造者的好關係總是一種好想法
並不全部其他功能以來支持/許可被需要因為標準命令被使用。
開發者運動還沒被支持。
Quote:
Originally Posted by totos
Thank you very much Eric!
I would like to ask you how the *PIE, POE, AND POF* parameters of PlexTools are compared to your CDDVDSpeed...I mean mean which correspond to which...
PIE = PI Errors
POE = PO Errors
POF = PO Failures
CD-DVD Speed doesn't report PO Errors but PI Failures.
The other two parameters should be comparable with PlexTools.
報價︰
最初透過totos公佈
非常感謝你艾利克﹗
我想要 在問你*餡餅，波，和POF * PlexTools的參數比作怎樣我指的你CDDVDSpeed 意味著哪個相當于哪個 ...
餡餅 = PI 錯誤
波 = 郵電亭錯誤
POF = 郵電亭失敗
CD -DVD速度不報告郵電亭錯誤而是PI錯誤。
其它兩個參數應該可與PlexTools相比較。
Quote:
Originally Posted by johnzap
Any chance of adding support also for the Asus DVD-E616? Or is it not on the horizon?
I've asked Asus but unfortuntaly older drives do not support this function.
__________________
報價︰
最初透過johnzap公佈
有為Asus DVD-E616也增加支持的機會嗎？ 還是它不即將出現？
我問Asus但是unfortuntaly更舊的駕駛不支持這個功能。
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
http://club.cdfreaks.com/showthread...5&page=10&pp=25
Quote:
Originally Posted by professor_nova
I'm back after 3 weeks, so here is the original data regarding the strange problem:
LG GCE-8320B (firm 1.04)
Disk Quality Test, the drive just spins-up, and then does nothing. The program does not freeze. I can stop the test.
- tests -
Disk Quality Test (3.16, 3.21 and 3.30)
Audio-CD (Pressed) - Works
Audio-CD (Recorded) - Don't work
Data CD (Pressed) - Works
Data CD (Recorded)(CD-R) - Don't work
Data CD (Recorded)(CD-RW) - Don't work
And the answer to your question:
There is no difference with or without ASPI layer. The problem remains. I have tested the drive in two diferent computers (both AMD and with Nero).
Do you have an nForce2 motherboard? There are some issues with nForce IDE drivers.
報價︰
最初由教授委派 _ 新星
我在3 周之后回來，關於奇怪的問題的初始數據也是︰
LG GCE 8320B(堅定的1.04)
只磁片質量檢驗，運動向上紡， 然後什麼也沒做。 計畫不結冰。 我能停止試驗。
-測試 -
磁片質量檢驗(3.16，3.21 和3.30)
音頻CD (壓) - 工作
音頻CD (記錄) - 不工作
數據CD(壓) - 工作
數據CD(記錄)(CD -R) - 不工作
數據CD(記錄)(CD -RW) - 不工作
以及你的問題的答案︰
有或沒有ASPI層沒有差別。 問題剩下。 我在計算機二diferent內測試那些行程(兩個AMD並且有尼羅)。
你有nForce2 主板嗎？ 與nForce艾德司機有一些問題。
Quote:
Originally Posted by wesociety
@Erik, does BenQ plan to ever add support for higher speed scanning and PIF reporting for the 800/822A ?
Yes
Here is a screenshot:
報價︰
最初透過wesociety公佈
@艾利克，BenQ 計畫增加為800/822A 報告的對高速掃描和PIF的支持嗎？
是的
這是screenshot︰
http://cdspeed2000.com/forum/ATAPI_...-2004_15_26.png
There are a few issues but normally they should be fixed soon.
Available scanning speeds are 4x, 6x and 8x (all CAV).
有一些問題，但是通常他們不久應該被修理。
可提供的掃描速度是4x，6x和8x(全部CAV)。
Quote:
Originally Posted by RickTheRed
Does anybody know what is the meaning of "Glitches removed" at the very
end of the data report with CDDVD speed quality test?
Let's say that the PI/PIF are very good but I have 3 "glitches removed", is this a good
burn?
Thanks
Glitches are small bugs from the chipset or firmware which could mess up the end result.
Nothing to worry about
__________________
報價︰
最初透過RickTheRed公佈
做，任何人知道，意思那兒"故障除去"對
數據的末端由於CDDVD速度質量檢驗報告嗎？
假如PI/PIF 好我有3"故障除去"，這利益是
燃燒嗎？
感謝
故障是來自能搞亂結果的晶片組或者固件的小的缺陷。
沒有什麼擔心
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Quote:
Originally Posted by DerDembo
Hi Erik,
wow the scanning looks incredible os far
If you find a minute would you mind commenting on the weired scan results I get when using a Benq822A+ in an external enclosure (c.f.
http://club.cdfreaks.com/showthread.php?t=102402 ). I know it is probably not your but the ATA-Firewire chips (Oxford911) fault, however, if there is any chance that the problem might be fixed somehow I would be glad in helping you out (creat dumps of acctual data transmitted etc.).
Cheers,
Dembo
I'm not sure what could cause this problem but I will check it.
__________________
報價︰
最初透過DerDembo公佈
喂艾利克，
掃描看起來難以置信的os的極大的成功遠
你發現好對作評論的一分鐘如果用壩擋住掃描什麼時候使用在一個外部包圍(c.f.
http://club.cdfreaks.com/showthread.php?t=102402)內的一Benq822A+的我得的結果。 我知道這或許不是你的但是ATA防火線片(Oxford911)錯誤，但是， 如果有設法我將在幫助你度過難關過程中高興的任何問題可能被修理的機會(傳送等等的acctual 數據的creat 垃圾堆)。
乾杯，
Dembo
我不能確信什麼能引起這個問題，但是我將檢查它。
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _