http://club.cdfreaks.com/showthread...85&page=8&pp=25
Originally Posted by herbei
Hy Erik,
i just downloaded versin 3.21 and disk quality test is not longer working for BTC 1108 IM. I always get the message: Drive does not support this function.
...gone back to 3.10 and all is working great.
thx
Do you get this error when testing DVDs or CDs? (or both?)
最初透過herbei公佈
耐的艾利克，
i 下載的versin 3.21和磁片質量檢驗更不長為BTC工作1108 IM。 我總是得到消息︰ 運動不支持這個功能。
追溯到3.10 全部工作巨大。
thx
當測試DVD還是CD 時，你得到這個錯誤嗎？ (或者兩個？)
Quote:
Originally Posted by Halcyon
Thanks for the update Erik!
If you will, please consider the following wishes as potential future features to implement:
- scalable window (along with the graph)
- dynamic setting of all colours/scales in the graph (can be changed after the scan and the graph is redrawn), including background and grid colours
- addition of accurate units for blockheads like me ( PIE/ECC or PIE/8ECC, depending on what is being measured/graphed, now it just says 'PIE')
Of course, those are just my wishes
Thanks again for this great utility!
Thanks for the suggestions!
報價︰
最初透過平靜公佈
感謝更新艾利克﹗
如果你將，請，認為下列願望為潛在的將來的特徵實現︰
-可調節的窗子(與圖一起)
-全部顏色/ 規模的動態的底座在圖(在掃描之后可能被改變，圖是redrawn)裡，包括背景和閘極欄顏色
-給傻瓜的準確的單位的增加喜歡我(PIE/ECC或者餡餅/ 8ECC， 取決于什麼正被測量/用膠版印刷，現下它只說'餡餅')
當然，那些正是我的願望
為這大的效用再次感謝﹗
感謝建議﹗
Quote:
Originally Posted by Cyclone
C1/C2 scan of CD-R using Nu DDW-082 B375 in USB 2.0 case still locks up drive using ver 3.21 . Back to ver 3.00 for me.
There are indeed some issues with the C1/C2 error scan with Nu Tech drives.
NU Tech contacted me about this and I am now working on a solution.
__________________
報價︰
最初透過颶風公佈
C1/C使用Nu 082 DDW B375在USB 2.0 箱的CD R 2掃描仍然鎖上駕駛使用ver 3.21。 為我回到ver 3.00。
有的確一些期刊與C1/C 2 錯誤一起與Nu技術一起掃描駕駛。
NU技術關於這與我聯繫，我現下正著手做一個解決辦法。
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Quote:
Originally Posted by Halcyon
BenQ DW1600A (fw. official b5g9) on XP, using Nero ASPI layer, does not report C1/C2 errors on cd-r disc using CD Speed 3.0, 3.10 or 3.16 (only jitter/speed are reported):
I've checked it and got the same result (ie. no C1 or C2 errors).
I will look into this.
__________________
報價︰
最初透過平靜公佈
BenQ DW1600A(fw。 在XP上正式的b5g9)， 使用尼羅層ASPI，不要報告2在光碟cd r上的錯誤的C1/C使用3.0，3.10或者3.16速度CD(只感到緊張/速度被報告)︰
我檢查它並且有相同的結果(例如。 沒有C1或者C2 錯誤)。
我將調查這。
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
這是"starless"發表的意見
Quote:
Originally Posted by ErikDeppe
CD-DVD Speed doesn't report damaged sectors with DVDs. Only good and unreadable sectors.
I hope this helps
Does it mean that "damaged sectors" will be included in the "good sectors" or there is no chance that DVDs will have "damaged sectors" on them？
報價︰
最初透過ErikDeppe公佈
CD -DVD速度做，並非報告用DVD 損壞部門。 只好和不能讀的部門。
我希望這幫助
做它意味著"損壞的部門" 將被歸入"好部門"，或者沒有機會DVD可能在他們身上"損壞部門"H
Quote:
Originally Posted by professor_nova
This is a CD-Writer, so only CDs
Actually, I just decided to do some tests. Here are the results:
Disk Quality Test (3.16 and 3.21)
Audio-CD (Pressed) - Works
Audio-CD (Recorded) - Don't work
Data CD (Pressed) - Works
Data CD (Recorded)(CD-R) - Don't work
Data CD (Recorded)(CD-RW) - Don't work
These are some strange results. I had never tried pressed CDs before, only CD-Rs.
I've tested with the LiteOn LTR-32123S which uses the same chipset but I could not find any problems.
Is ASPI or Nero installed?
報價︰
最初由教授委派 _ 新星
這是一位CD 作家，如此只CD
實際上，我剛剛決定做一些試驗。 這是結果︰
磁片質量檢驗(3.16和3.21)
音頻CD (壓) - 工作
音頻CD (記錄) - 不工作
數據CD(壓) - 工作
數據CD(記錄)(CD -R) - 不工作
數據CD(記錄)(CD -RW) - 不工作
這些是一些奇怪的結果。 我以前從未試驗壓的CD，只是CD -Rs。
我已經用使用相同的晶片組的LiteOn LTR-32123 S測試，但是我不能找到任何問題。
ASPI 還是尼羅被安裝嗎？
The upcoming version has more graph options.
And more drives will be supported
即將到來的版本有更多的圖選擇。
並且更多的運動將被支持
http://cdspeed2000.com/forum/Themes.png
http://cdspeed2000.com/forum/Bright.png
http://cdspeed2000.com/forum/Neon.png
Quote:
Originally Posted by packetloss
A question to ErikDeppe:
It seems that you used the Aopen 1648/AAP DVD-ROM (1.07 firmware version) for this 'demonstration of colours'. I have the same drive (which is absolutely fantastic I might add, highly recommended), and use it with your great tool often. The only problem I have is that the speed setting in the disc quality test doesn't seem to work properly; the drive always scans the media at full speed. I'd like to reduce the speed for scanning (for obvious reasons), but it simply doesn't work.
Thank you for your great tool.
There's indeed a problem with the speed settings with this drive but normally this can be fixed soon.
ps. I agree that this is a great drive
報價︰
最初透過packetloss公佈
一個問題到ErikDeppe︰
它好像你為這次'顏色的示範'使用Aopen 1648 /AAP DVD-ROM(1.07個固件版本)。 我有相同的運動(絕對奇妙我可以增加，非常建議)，並且經常用你的大的工具使用它。 我有的唯一的問題是確定在這個光碟方面質量檢驗的速度好像不正確地工作； 運動總是全速瀏覽媒介。 我想為掃描(由於明顯原因)降低速度，但是它僅僅不工作。
感謝你的大的工具。
用這運動的確有有速度底座的一個問題但是通常這不久可能被修理。
ps。 我同意這是大的運動