請問 Blindspot, 使用 SPFDisk 時, 要如何確定輸入的磁柱編號??
我有一顆 S-ATA ST3160023AS 160G 之 HD 亦發生整顆HD 變成未格式化之情形:
http://forum.pcdvd.com.tw/showthread.php?t=381542
我有兩顆運轉正常之 IDE HD 在 BIOS ROM 裡, 顯示出之資料為:
Model CYL; Head; Sector; LBAM
ST380011A 38309 16 255 ON 80Gb (Disk1 : NTFS 開機+ FAT32 + NTFS)
DTLA-307030 59560 16 63 ON 30Gb (Disk2 : FAT32 開機)
但是此顆 SATA 之 HD 僅顯示 Maximum Capacity: 160.0Gb
由 Segate 之網站:
Model CYL; Head; Sector
ST380011A 1023 256 63
ST3160023AS 16383 16 63
可是使用 Partition Magic 8 顯示之資料如下:
==========================================================
Disk Geometry Information for Disk 1: 9729 Cylinders, 255 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
==========================================================
0 0 80 0 1 1 07 123 254 63 63 18,442,557
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 80 0 1 1 07 1147 254 63 63 18442557
NO NAME 0 1 00 1023 0 1 0C 1023 254 63 18,442,620 6,136,830
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 1 00 1148 0 1 0C 1529 254 63 18442620 6136830
0 2 00 1023 0 1 07 1023 254 63 24,579,450 131,716,935
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 2 00 1530 0 1 07 9728 254 63 24579450 131716935
==========================================================
Disk Geometry Information for Disk 2: 3737 Cylinders, 255 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
==========================================================
WME 0 0 80 0 1 1 0C 1022 254 63 63 60,034,842
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 80 0 1 1 0C 3736 254 63 63 60034842
==========================================================
Disk Geometry Information for Disk 3: 16709 Cylinders, 255 Heads, 63 Sectors/Track
Info: Disk Manager is installed on this drive.
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
==========================================================
0 0 80 0 1 1 07 1023 254 63 63 312,576,642
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 80 0 1 1 07 19456 254 63 63 312576642
Error #109: Partition ends after end of disk.ucEndCylinder (19456) must be less than 16709.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
引用:
|
作者Blindspot
由衷感謝 purewater 大提供的協助，
我確實救回了分割，而且系統也能開機了！
本以為SPFDisk只能辨識NTFS磁區，
在他的說明中並無明確提到是否支援NTFS分割救援...
所以讀了說明文字不下五次還是不敢下手，最後放手一博，竟然成功了！
我依照規則輸入磁柱編號，
並且設定Widowns XP所在的Partition為Active (設定活動  )，
重新開機後就直接進入Windows XP，沒有遇到任何問題。
就這麼簡單的解決這個麻煩，真是眾裡尋他千百度，他卻在燈火闌珊處 
之前在網路上找了好多資料，連MFT、GUID都給他看了一遍，
還以為要搞個MFT復原，找了好多試用版工具，最後才發現自己真傻，
花了好多時間，希望以後有人遇到這種問題時，能好好利用國產的SPFDisk，
這真是一個介面迷人，輕薄短小，功力高強的好工具！  |