瀏覽單個文章
d8953903
Junior Member
 

加入日期: Feb 2002
您的住址: 豐原~~
文章: 850
Talking

引用:
作者QooAMD
友通嗎?哪裡有介紹?
有測試報告,,,,請分享囉

目前米有測試 有消息八月底或九月初會推出
那期待他是因為K7和P4的表現一樣強悍 再加上炫麗的外型所以....呵呵
以下資料引用自有通官網
請按----官方介紹

規格如下-----------------------------------
CPU
AMD Athlon 64 (up to 3700+)
Socket 754

CPU Socket
Socket 754

Chipset
nVIDIA® nForce3 250Gb

Memory
Three 184-pin DDR SDRAM DIMM sockets
Supports single channel (64-bit wide) memory interface
Supports up to 3GB memory when using DDR333
Supports up to 2GB memory when using DDR400
Supports PC2700 (DDR333) and PC3200 (DDR400)
DDR SDRAM DIMM
Supports x8/x16, non-ECC, up to 512Mb DDR devices
Supports unbuffered DIMM

BIOS
Award BIOS
CPU/DRAM/AGP overclocking
CPU/DRAM/Chipset overvoltage
4Mbit flash memory
AMD Cool'n'Quiet technology

Power Management
Supports ACPI specification and OS Directed Power Management
Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-Ring (external modem)
- Wake-On-LAN
- RTC timer to power-on the system
AC power failure recovery

Hardware Monitor
Monitors CPU/system temperature
Monitors 12V/5V/3.3V/Vcore/Vbat/Vsb/Vnb/Vdram/Vagp voltages
Monitors CPU/chassis fan speed
CPU Overheat Protection function monitors CPU temperature during system boot-up

Audio
Realtek ALC850 8CH audio CODEC
Supports Microsoft® DirectSound/DirectSound 3D
S/PDIF-in/out interface

LAN
Marvell 88E1111 GbE PHY
10/100/1000BASE-T IEEE 802.3 compliant

IDE
two IDE connectors support four UltraDMA 133Mbps hard drives
NVIDIA RAID supports spanning across Serial ATA and Parallel ATA
RAID 0, RAID 1, RAID 0+1 and JBOD

Serial ATA with RAID
Supports four SATA interfaces with speed up to 1.5Gbps
- Two Serial ATA ports supported by nForce3 250Gb chip
- Two Serial ATA ports supported by Marvell SATA PHY
NVIDIA RAID supports spanning across Serial ATA and Parallel ATA
RAID 0, RAID 1, RAID 0+1 and JBOD

IEEE 1394 (optional)
VIA VT6307 controller
Supports two 100/200/400 Mb/sec ports

AGP
Supports AGP 8x up to 2132MB/sec. and AGP 4x up to 1066MB/sec. bandwidth
for 3D graphics applications
Supports 0.8/1.5V add-in cards

Rear Panel I/O Ports
1 PS/2 mouse port
1 PS/2 keyboard port
1 DB-9 serial port
1 DB-25 parallel port
2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
1 IEEE 1394 (Optional)
1 RJ45 LAN port
4 USB 2.0/1.1 ports
6 audio jacks for 8CH audio output

I/O Connectors
2 connectors for 4 additional external USB 2.0/1.1 ports
1 connector for 1 external IEEE 1394 port (Optional)
1 front audio connector for external line-out and mic-in jacks
1 CD-in internal audio connector
1 S/PDIF connector for optical cable connection
1 IrDA connector
4 Serial ATA connectors
2 IDE connectors
1 floppy connector
2 ATX power supply connectors (20-pin and 4-pin)
1 front panel connector
3 fan connectors for CPU fan, chassis fan and 2nd fan
EZ touch switches (power switch and reset switch)

Expansion Slots
1 AGP slot that supports 8x/4x AGP
5 PCI slots

PCB
ATX form factor
30.5cm (12") x 24.5cm (9.44")
__________________
CPU: Intel® Core™ i7-6950X
MB: MSI X99A GAMING PRO CARBON
RAM: Micron DDR4 2400 16gx8
VGA: MSI RTX3050 GAMING X 6G
SSD1: PLEXTOR M8PeG
SSD2: INTEL 750 1.2TB
POWER: CORSAIR AX1600i + HDPLEX 500W
OS: Windows 2019 in ram
舊 2004-08-25, 06:48 PM #60
回應時引用此文章
d8953903離線中