引用:
Originally posted by wenperng
http://www.kouwell.com.tw/download2.htm
下載 KW-910U DOS 驅動程式
在讀我檔有詳細 CONFIG.SYS 寫法，將這個檔案跟
ASPI910U.SYS、INICD.SYS 燒至開機光碟根目錄，即可
使用。
或將程式解壓至磁碟片，執行 DOSSETUP.EXE 也可，但是自己
修改 CONFIG.SYS 是最一勞永逸的方法，自己摸索看看。
釣竿在此自己釣魚，現在不想再當好人了，常常幫人家解決問題後
，發文者回個文都沒有，自己在那白打字像傻瓜一樣！
GOOD LUCK！下次別一文多 PO 了！
|
=====================
大大好~~
我搞了ㄧ整個下午了~終於搞到只剩下編輯Config.sys 以及Autoexec.bat 這2個檔案了
但是我~~並不是很懂這些指令~
Autoexec.bat 我ㄧ打開~裡面長的是這樣子~~
----------------------------------------
@ECHO OFF
set EXPAND=YES
SET DIRCMD=/O:N
......(以下省略)
------------------------------------------
我爬文過~有人是說要加一個"mscdex"指令
但是~~要加在哪裡呀?第一行嗎?????(不懂中)
另外Config.sys指令~~說明書是這樣寫~
1.軟體驅動寫法: DEVICE=C:\INIASPI\ASPI910U.SYS
參數:
/D Verbose mode provides detail information about driver when
driver is inititalized
/L Drvier scan eight LUNs for each SCSI Target.
/Bx,yy Scan device only on PCI BUS x, DEVICE yy The range for "x" is from 0 to 7. The range for "yy" is from 0 to 20.
/Bx Scan all the devices on the PCI BUS x The range for "x" is from 0 to 7.
/Syy Scan device only on the PCI BUS 0 & Device yy. The range for "yy" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/Os that driver supports. The range for "x" is from 1 to 16.
2.光碟機驅動寫法: DEVICE=C:\INIASPI\INICD.SYS
參數:
/D:<name> Specifies a logical name to the SCSI CD-ROM device driver.
/Xx:y:z Exclude a specific CD-ROM drive(SCSI H/A #x, ID #y, Lun #z) from being controlled by SCSI CD-ROM driver. When SCSI ID and
LUN are not specified, all devices on the supplied host
adapter number will be excluded.
/T specifies the timeout after which SCSI CD-ROM Driver returns
an error when the CD-ROM drive is not responding. Valid
timeout values are 1 through 9 minutes. The timeout default
value is 3 minutes.
嗯嗯~我知道前面怎麼寫(我要燒在同一片光碟就將c改a就好了)
但是參數部份就看不懂了(/後面)
請教一下是直接加在後面就好了嗎?
如果我的光碟機id是1的話,該如何寫?
這ㄧ次真的是跪哭求了~~大大~再幫幫我吧~~
感謝您~