引用:
Originally posted by NOTHINGNESS
常常看到各位高手把記憶體設定調成最佳化都是談到:
CAS Latency
RAS Precharge
RAS to CAS Delay
Precharge Delay
好像沒提到Burst Length,請問Burst Length是什麼呢?你們都調4或8還是不用調??我的預設值是8
RAS Precharge跟RAS to CAS Delay週期要調一樣的嗎?
我的記憶體是創見ddr400茂矽顆粒的 我把他調2.5 3 3 8經過測試通過這樣沒問題嗎,你們茂矽的最佳化是多少呢?能超到250嗎?
還有我的記憶體安全電壓範圍是多少呢?因為我的p4p800會把cpu偷加壓不知會不會連記憶體也加壓
謝謝!!
|
Burst Length (4/ 8) The burst length specifies how many data blocks are sent in one transmission cycle. Ideally, one transmission will fill one memory row on the L2 cache found in modern Pentium 4 and Athlon XP CPUs. That is equal to 64 Bytes, or eight data packets.
所謂的Burst Length,指的是在一次L2 Cache傳輸中所運送的資料量,理想值是一次傳輸填滿一個L2 Cache的memory row,在P4跟Athlon XP上剛好是64 Bytes或是8個資料包(data packets),因此設8比較好
而且照資料看起來burst length指的是L2 Cache,好像不是主記憶體
http://pdpsys.com/support/index.jsp?source=bios