Viewperf 7.11效能應該沒那麼低才對,proe與ugs應該在40左右,尤其是還超過頻...

http://www.pcdvd.com.tw/showthread.php?threadid=307437

測試配備:

P4 3.0G
P4P800(PAT)
1024MB DDR400
36GB 10,000rpm 8MB
WinXP Pro
1280*1024*32bit(53.03)

GFX5700U偽造QFX1100(內定值475/900)

SPEC Viewperf 7.11

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 26.75

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 128.9

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 132.3

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 29.61

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 40.25

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 40.92

PS:P4-3.0G與2.8G效能差異極微...