我由於之前win2000會將我的兩台燒錄機自動移除，<我是IDE2兩台燒錄機>
我就重新安裝2000但是，現在變成4x的+RW片卻一直失敗
紀錄檔部分如下：
下午 03:15:24 #12 Phase 24 File dlgbrnst.cpp, Line 1841
檔案暫存作業開始

下午 03:15:24 #13 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

下午 03:15:24 #14 Phase 25 File dlgbrnst.cpp, Line 1841
檔案暫存作業完成

下午 03:15:24 #15 Phase 36 File dlgbrnst.cpp, Line 1841
以4x (5,520 KB/s)的速度開始燒錄

下午 03:15:24 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

下午 03:15:24 #17 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

下午 03:15:24 #18 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 13:25,455 (805455ms) -> OK

下午 03:15:24 #19 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

下午 03:19:00 #20 SCSI -1135 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B1C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x08 0x77 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

下午 03:19:00 #21 CDR -1135 File Writer.cpp, Line 304
寫錯誤

下午 03:19:00 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 03:19:00 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

下午 03:19:00 #24 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

下午 03:19:00 #25 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

下午 03:19:00 #26 Phase 38 File dlgbrnst.cpp, Line 1841
以4x (5,520 KB/s)的速度燒錄失敗

之前都OK的說，難道只能用2.4x來燒嗎，但是有時候也會失敗@@，因為都一直出現
"寫錯誤"，我之前有重整硬碟過，但是一樣的結果，我也沒升韌體，唉！
不知道要怎麼解決？有大大能夠幫助嗎，先謝謝你了，等待解答中。