|
Elite Member
|
引用:
Originally posted by kcs
SoftMenu III Setup
CPU Operating Speed :User Define
- External Clock :200
- Multiplier Factor :*10.0 (11跑天堂2不穩 改調10)
AGP Frequency :66MHz
CPU FSB/DRAM ratio :BY/SPD (本來6/6,倍頻降10後調BY/SPD)
CPU Interface  isabled
Power Supply Controller :User Define
- CPU Core Voltage :1.65V
- DDR SDRAM Voltage :2.7V
- Chipset Voltage :1.5
- AGP Voltage :1.5
CPU Over Temp. Protect :65 C
Advanced Chipset Features
Memory Timings :Expert
- Row-active delay :11
- RAS-to-CAS delay :3
- Row-precharge delay :3
- CAS Latency Time :2.5
AGP Aperture Size :128M
硬體配備如簽名檔 辛苦了!
|
嗯,看來應該不是RAM的問題,不過Row-active delay不用這麼慢,正常是8,設8應該比較好
另外Chipset Voltage預設值是1.6V,把它調回去看看,1.5V有一點低,200外頻可能不穩 |