我記得K PROBE也是建議使用DVD燒錄器來讀,而不建議使用DVD ROM來讀
下面這段英文有提到

For the following recommendations to be true K-Probe must be set to 8 ECC PI/PO sum while scanning and preferably scanned by a Lite-On DVD-Writer (in other words NOT a DVD-ROM or Combo!).


另外有提到也是建議使用讀取倍速是4X

And another note is that we normally scan/recommend scanning the discs at 4X CLV speed since this saves time compared to 2X/2.4X and 1X scanning and still offers CLV reading, but by lowering the speed to 2X(DVD-R/RW)/2.4X(DVD+R/RW) or 1X the amount of reported errors may drop on some discs.