引用:
Originally posted by touchow
我新發現的問題
正要安裝的時候訊息顯示
只能安裝在一顆CPU系統上!!
也就是說用P4CPU的朋友們,HT需要關閉才行使用,
不曉得各位有沒有碰到這樣的情形呢!?
|
http://www.pcdvd.com.tw/showthread....ighlight=maxtor
請爬文....
簡單的說
1. 不支持 RAID
2. PATA 或 SATA 都支持
3. 一定要是 Quantum 或 Maxtor 的硬碟
4. 只支持 2000 或 XP
(應該98 ME系列都不支持 但也應該會支持2003 但沒說明)
5. 不支持 Intel 的 Hyper-Threading 一定要關掉
然後也不支持雙 CPU 的系統..
6. 要注意 在 RAM 上面有限制
System RAM Max number of Drives Supported with MaxBoost
256MB 1 Drive
384MB 2 Drives
512MB 3 Drives
768MB 4 Drives
256MB 只支持 1 個硬碟
384MB 只支持 2 個硬碟
512MB 只支持 3 個硬碟
768MB 只支持 4 個硬碟
7. CPU 速度要在 700Mhz 以上
MaxBoost is performance-boosting driver software which operates under Microsoft Windows 2000 and XP and which is designed to complement your Maxtor ATA or SATA hard drive. The MaxBoost driver intelligently caches data in the host system RAM before it is written to and read from the Maxtor disk drive, enhancing the effective storage speed of your system under a variety of system conditions and applications.
What are the minimum system requirements to install and use MaxBoost?
Maxtor or Quantum ATA or SATA hard drive (RAID not supported)
Microsoft Windows 2000 or XP operating system
Intel or AMD processor, 700 MHz or higher
(Dual processors not supported. Hyper-Threading must be disabled.)
256 MB RAM or higher
As part of the installation process, you will be asked to select one or more drives to "boost." The maximum number of drives that can be addressed with the MaxBoost software at one time varies with the available RAM installed on the host system. See chart below for details:
System RAM Max number of Drives Supported with MaxBoost
256MB 1 Drive
384MB 2 Drives
512MB 3 Drives
768MB 4 Drives
NOTE: The MaxBoost driver is not intended for use with non-Maxtor/Quantum drives or system configurations other than specified above. Attempting to run the MaxBoost driver on unsupported system configurations can lead to decreased system performance or inconsistent system or disk drive behavior. Also, in the event of a sudden system shutdown, data stored in your system cache and not on the drive may be lost and recovery of that data may not be possible.