1776x1000i doesnt work with the ATI HDTV Adapter
http://www.rage3d.com/board/showthr...readid=33699981
Affects: 1 person (PM me if you want adding)
Workaround for problem: Use 3.2 drivers
Status: Unknown, reported? has been broken since 3.4 drivers worked fine before then, still broken in 3.8's


If you don't have a DDC monitor or don't have a monitor at all (only tv out). The card will not turn on in windows
Affects: Everyone who wants to use their PC in home entertainment, may JUST be 9100 users
Workaround for problem: Buy or make a dummy monitor plug and disable DDC in ATI control panel, use earlier drivers 3.1? a new bios also helps
Status: worse in 3.6 drivers and still broken in 3.9 drivers, some people report they have no problems, reported *UPDATE this will be fixed in a future release*


Clive Barkers the Undying problem with snow (Monastary level) and other problems with AF enabled, graphical problems with Wheel of Time also with AF
http://www.rage3d.com/board/showthr...adid=1332107543
Affects: 9500 - 9700 users only, works on 8500
Workaround for problem: Problems are only apparent using less than 16x AF,forced triliniar AF helps too, games dont support OGL Dll
Status: Unknown, reported, most likely badly coded games but does work fine on Nvidia cards


Messed up lighting in DAOC when using torches
Affects: everyone
http://www.rage3d.com/board/showthr...readid=33666317
Workaround for the problem: None, unless you count waiting for the new engine being developed for the Atlantis addon, in the hope that its fixed
Status: reported multiple times, never acknowledged


TruForm doesnt work anymore in Morrowind (enabled via the FPS otimiser)
http://www.rage3d.com/board/showthr...rrowind+truform
Affects: Everyone
Workaround: Use 3.2 drivers or earlier
Status: Will be fixed in a later driver, reported multiple times, still doesnt work with latest expansion or patch, still broken in 3.9 drivers


No loading bar when Morrowind loads a new cell just a coloured screen
Affects: Everyone?
Workaround for problem: Use 3.5 drivers or earlier
Status: unknown, reported, still broken in 3.9 drivers


Horrible performance in Star Trek Elite Forces 2 with Stencil Buffer shadows enabled
http://www.rage3d.com/board/showthr...4&highlight=EF2
Affects: Everyone
Workaround: None
Status: Unknown, reported


C&C Renegade texturing problems
http://www.rage3d.com/board/showthr...stid=1332115009
Affects: 8 users. im one of them (so far)
Workaround for the problem: Use 3.4 drivers
Status: Will be fixed in a later driver set, Reported, still broken in 3.9 drivers