瀏覽單個文章
jackiechin
Power Member
 
jackiechin的大頭照
 

加入日期: Jan 2003
您的住址: 比利時巴斯通
文章: 612
[發現]利用遙控器就可以改區碼了-9

Wharfedale DVD-750 打開倉門
放入1區碟,不要關倉門
按0,1,2,3
再按Play。你的DVD機就成了全區機。

Wharfedale DVD-750 S 按0, 7, 5, 0
再按你想要的區碼即可。

Wharfedale DVD-M5 確信DVD機中沒有碟片
按'Set up'
再按'62836',再按'Enter'
然後螢幕上出現一個圓孔
選擇'Bypass',再按Enter
最後按'Set up'退出菜單

廈新DVD-20 1. Power on the player.
2. Open the players tray and leave it open.
3. Make sure no disc is inserted.
4. Using the remote control, key in 0, 1, 0, 8, followed by the region number, or use 0 for region free.
5. Press Stop on the remote control 8 times.
廈新DVD-8506F 1. Power on the player.
2. Open the players tray and leave it open.
3. Make sure no disc is inserted.
4. Using the remote control, key in 0, 1, 0, 8, followed by the region number, or use 0 for region free.
新科 DVD180
新科 DVD380
新科 DVD2100
新科 DVD2120
新科 DVD8320 1. Press Stop, Setup, Still/Step (or Pause) on the remote control.
2. Press 1, 2, 3 on the remote control.
3. You should then be in a 'loopholes' menu, which states that 'you shouldn't be here'.
4. You can change the region and macrovision options, along with much more using this menu.
新科 DVD180
(其他方法) 1. Press the Open button on your remote control to open the tray.
2. Using the remote control, press 7, Enter, 7.
3. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free by entering 13 as the country code.
4. You can also disable Macrovision from this menu.
5. There are sound interruptions during chapter changes on some discs.
新科 DVD360
新科 DVD960 RCE workaround:
1. Load the disc.
2. The map should show on the screen.
3. Press the Stop button twice.
4. Wait until the Press Play to Continue sign disappears.
5. Press Play once.
6. Wait for 5 seconds and a Program sign will appear.
7. Press Play twice.
8. A Continue sign should appear.
9. Press the Play key once and the film should then play.

Region Select and disable Macrovision:

1. Press Eject and remove all discs from the tray.
2. Close the tray.
3. Using the remote control, key in the following: Pause, 1, 2, 3.
4. A loopholes menu should appear, allowing you to change region and disable Macrovision.

Zenith DVD-2381 同Aiwa DV 370
舊 2003-09-04, 01:30 PM #10
回應時引用此文章
jackiechin離線中