找到一篇 文章
友好多種機器利用遙控器來更改區碼 或變成全區機
能改幾次我沒試過
----------------------------------------------
說明文章下載
ftp://203.95.192.203/iso/dvd.htm
----------------------------------------------
----------------------------------------------
未編排文章模式
----------------------------------------------
DVD機全區碼攻略
本文列出部份DVD機通過遙控器按鍵來修改DVD機區碼的方法。
除非你遇到DVD機顯示由於區碼限制而無法播放碟片時，你最好不要進行任何修改。
如果你的DVD機使用的是PC用的DVD光碟機的話，你可能只能改5次區碼，請確信你最後不可更改之前的區碼是你想要得區碼。
不能保證文章中的方法安全有效，也不會對你的DVD機造成任何損壞。
請在動手前三思！ 我並不知道其他DVD機區碼更改方法，請不要問我。
如果你知道其他DVD機(不管是國產還是進口)，非常歡迎你EMAIL給我。
DVD機型號----------------------------- 更改區碼
Acoustic Solutions
DVD321 DVD421 DVD451 DVD651
1. Press the Open button on your remote control to open the drive tray.
2. Press the Setup button on your remote control.
3. Press the Next button on your remote control.
4. Press the Previous button on your remote control.
5. Press the Next button on your remote control.
6. Press the Previous button on your remote control.
7. A code should appear on the top left hand corner of the onscreen display.
8. Using the direction buttons on your remote control, change the code to VER 1 for region 1 playback, VER 2 for region 2, and so on, or VER 255 for multi-region playback.
9. You can also change the code to VER 3001 to enable parental controls, or VER 3000 to disable these controls.
10. You can also change the code to VER 4001 to enable Macrovision, or VER 4000 to disable this feature.
11. Press the Setup button on your remote control.
12. VER5000 plays VCD and VER5001 disables this feature.
Acoustic Solutions
DVD521
DVD551 1. Using the remote control, key in the following: Setup, Next, Stop, Pause/Step, Prev, Next.
2. You should now be in a secret menu where you can change the region from 1 to 6, or All for region free.
Afreey
LD-2060 DVD
(old firmware) 1. Press SETUP on the remote control
2. Choose PREFERENCE on the menu and enter it.
3. Press STILL/STEP, PREV, NEXT on the remote control.
4. You can select the region you want or BYPASS for region-free.
5. You can also disable Macrovision from this hidden menu.
Afreey
LD-2020
LD-2060 DVD
(newer firmware) 1. Press SETUP on the remote control.
2. Press 3, 8, 8, 8, 3 on the remote control.
3. You can enter the hidden setup page and change the region to any wanted or set it to region-free.
Afreey
PDV-2000 1. The procedure must be done WITHOUT a disc in the player, and the remote control must be used.
2. Turn on the player.
3. Press Setup on the remote control.
4. In the Setup menu, press Sub-T, Zoom, Prev, Next.
5. On the top of the screen you will see "XX1XX".
6. With the arrows on the remote control, press Left or Right to change until the desired region number appears.
7. After you have selected the region, press SETUP to go back to the main screen.
Afreey
ADV-2360 1. The procedure must be done WITHOUT a disc in the player, and the remote control must be used.
2. Turn on the player.
3. Press Setup on the remote control.
4. In the Setup menu, press Zoom, Prev, Next.
5. On the top of the screen you will see "XX1XX".
6. With the arrows on the remote control, press Left or Right to change until the desired region number appears.
7. After you have selected the region, press SETUP to go back to the main screen.