言重了＠＠我沒說清楚sorry
我是指在此連結中OCworkbench的會員Killeroy的說法：
Here is some information passed on to me by Tigershark78 about the K7S3:

really important facts:

- all multiplicators are free from 5 to 24 like at NF7
- all bios options are equal to K7s2
- timings of Ram are only possible with 2,5;2;2 up to maximum of 199 FSB, from 200 FSB timings are set automatically to 2,5;3;3 and the PC does not start anymore
Setting D-Ram on "normal" instead of "performance" in bios, PC starts with 3,4,4 and gets in FSB400 Mode only 2300/2100MB/s in SiSoft2003-
_ at more than 200 FSB the system does not boot anymore, it is only stabil till 190 MHz
- its not able to start again, until taking off the power cable for ca. 10 sec, then it starts again (it is always like that)
- Lan adapter is not compartible
- performance is awfull
- NB-Cooler does not have good contact to NB
……………………………………………………………
另外我也有用K7S2在超外頻過190MHz時就很難上的去
以ocfiles的說法問題出在+5V
測版子是很累的事,也在此致謝！