呵呵，真是感謝 milolou兄由心而發、自創出來的招式
在gzeasy那邊目前也是被置頂，証明這個方法的參考價值非常高!
http://bbs.gzeasy.com/index.php?showtopic=27722


最後麻煩亮哥和milolou兄幫弟看一下弟的測試成績
好像比亮哥以及正統的FGL X1低許多
可以幫我想一下問題出在那嗎?在此先謝了
順便給各位參考一下各種方法的不同效能
------------------------------------------------------------------

測試環境：
AthlonXP 2600+(166*12.5)/WinXP SP1/Viewperf 7.1/技嘉9700p/Epox 8RGA+/768MB DDR SDRAM(5-2-2-2)

掛上FireGL的driver的測試均為DEFAULT組態

註：
[email protected] / FGL X1(未刷bios)@cracked 1029 / FGL X1(未刷bios)@cracked 1036 / FGL X1(刷bios)@cracked 1036

測試成績如下：

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 9.462/0.00000/16.65/17.46

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 34.97/62.81/80.33/99.13

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 50.53/70.13/83.99/105.0

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 0.00000/18.37/22.57/22.71

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 11.40/16.44/19.93/22.61

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 13.08/29.88/23.34/29.86