關於從國外帶回的DVD錄影機在台灣使用的問題...
 

朋友從國外回來.帶了一台BENQ DE320的DVD錄影機給我...

可是我在台灣接好線以後.發現這台機器輸出格式是PAL

然後在MEMU裡面找不到輸出改NTSC的選項

然後區碼是2區...

不知道是否可以透過進入工程模式的方式更改輸出成NTSC然後區碼改成3區呢?

謝謝~

PS:詢問BENQ公司是說這台機器台灣並未販售.所以沒有相關韌體支援...

B, I don't know.

but Pio HK DVR, you can find FW to make region free and set to NTSC.

http://forum.rpc1.org/dl_all.php到這裡找看看，它的機心好像是1620，看能能將其韌體整至用其他錄放機的韌體檔裡(例如DE350)，燒成光碟進行更新 :D

編輯時間過了，是DE325 :stupefy:

大大不好意思，我看錯了，應該不是1620的機心，以下是DE325改區碼的方法，大大可以試試看! :jolin:

First is to power up your recorder and press "INPUT" to switch the display to "Cam1" and press "OK", Next press "3 2 5 0" and press "OK", finally you would see the display to "000" and your player is now a multi-region player.. Think by pressing the 325 is the model number, pressing 0 is multi-region, pressing 1 is code 1, 3 is code 3 and so on....

試試看，DE350韌體能不能刷DE320(應該不行吧! :flash: )，DE350可以藉由不同區域韌體來設定NTSC或PAL的功能，看了一下DE320的manual有支援NTSC訊號輸入，以下是DE350改韌體的相關文章 :shock:
If you want to use your DVD in a country on Asia-Pacific Region, you may find the needed firmware file on the BenQ US official website (the link is http://support.benq.com/front/BenqMain.asp?MenuHe ... undefined) and the name of the file is "DE350_APAC_016CH_CS_0929.upd". If you want to use it in Europe, you may find the firmware file on the BenQ Europe official website (http://www.benq-eu.com/serviceandsu...cfm?product=795) and the name of the file is "de350_eu_021ch_cs_20050929.upd". You have to burn the respective file on a CD, insert it on the DVD Recorder, and follow the instructions on the screen. Also, on these pages you may find the install instructions. BE AWARE - THE PROCESS IS IRREVERSIBLE! FOR INSTANCE, IF YOU HAVE A US REGION CODED BENQ DE350 DVD RECORDER, ONCE YOU RUN THE "EUROPE"/"ASIA" FILE ON IT, YOU WILL NOT BE ABLE TO RESET THE DVD RECORDER TO THE INITIAL CONFIGURATION. HOWEVER, IF YOU HAVE THE ABOVE MENTIONED FILE, YOU WILL HAVE NO PROBLEM TO RE-INSTALL THE DESIRED UPGRADE. If you will find a firmware file for transforming this DVD Recorder into a US region DVD Recorder, please let me know ([email protected]).

沒用.機器沒反應耶|||