TechPowerUp GPU-Z v0.2.0
 

- Added support for S3 graphics cards
- Added screenshot upload feature (press F5 or click the camera icon)
- Added NVIDIA GT200 detection
- Updated RV770 detection
- Vista64 is now listed as "Vista64" in the driver version readout
- On Vista64, CrossFire status will be marked as "Unknown" until fix is found
- Added dump to XML. Use command line parameter -dump gpuz.xml
- More robust NVIDIA clock detection
- Fixed G73 fillrate calculation
- Added die size for RV350
- Fixed R680 clock readings
- Fixed R600 ROM reading code
- Fixed sensors not refreshing properly sometimes
- When unknown architecture detected, NVIDIA logo won't be shown anymore
- Fixed random UNICODE characters on some architectures in upload progress

TechPowerUp GPU-Z v0.2.0

水喔！感謝分享！
前一個版本我一執行，不是沒反應；在不然就會當掉....

我已經不敢再用了...這個軟體與我無緣 :unbelief:

+1

不知是不是用AGP的關係∼ :stupefy:

剛才上官網去抓
發現又出了新版0.2.1

Fixed Vista32 / Vista64 detection. It was reversed in 0.2.0.

TechPowerUp GPU-Z v0.2.1

要執行這個時
用卡巴司基的人
請把它關掉
不然會當機啊~~~
不知道這版有沒有改善了喔
不想試了= ="

GPU-Z出的還真快啊！感謝分享。 :)

小弟是卡巴 + GPU-Z 0.1.9，不會當機 :p
不過之前也是當的很厲害(0.1.7版之前)，現在都不太敢隨便嘗試新版的GPU-Z:ase