Question for OC E4300
 

Good time all.I have some question base on the following specs:

Intel Core 2 Duo E4300
ASUS P5LD2 SE
Kingston KHX7200D2K2/1G
Seagate 80GB SATA(System)
Seagate 80GB PATA(Backup)
GeForce 7600GT 256MB 128Bit
Original 550 watts PSU

1.)In the BIOS setting if using ASUS AI to set the FSB1333/DDR667 it will work but can't pass the SP2004 test because it will make my unit restart.What I can do?
2.)If in the BIOS use manual mode then set the CPU to 333MHz then DDR 666 it will not start after save the BIOS setting to CMOS.What I can do?
3.)I would like to set the CPU speed at 3.5GHz(389*9) then what kind of the setting I have to do?

Thanks for your help^^

1.maybe your NB too hot
2.set pci-e to 112-117 or change DDR2-ram Timeing to 5-5-5-15
3.Use LN2 and Set Vcore to 1.600V maybe Your E4300 Can RUN SP2004 @ 3.5G

P5LD2 SE is the cost down version of P5LD2, and it's chipset is 945P.
For my experience, 945P is hard to overclock more than 350Mhz frequency. :think:

小弟把 PCI-Express 調整到 118MHz 然後所有電壓不變就可以順利的超頻到 3.0GHz(333*9) & DDR2 666.只是不知道把 PCI-Express 調整到 118MHz 會不會對小弟的電腦硬體有不良的影響呢??