PCDVD數位科技討論區 - ImgBurn 2.2.0.0 released!

- Added: 'Read' mode for basic (sector by sector) creation of images direct from a cd/dvd.從光碟讀取影像檔
- Added: Unicode support to everywhere that needs it!支援Unicode
- Added: An 'AUTO' write speed where you can now have custom write speeds for individual media types/dyes on a drive by drive basis.
You can also use things like 'CD-R', 'DVD-R', 'DVD+R' etc.
- Added: Ability to preview Cells in the Build mode's 'Create layer break position' dialog box (or doing it via Tools -> ISO -> Display IFO Layer Break Position).
This uses PgcEdit's little PgcEditPreview.exe file.
- Added: Option of Standard/DOS/ASCII characters set for ISO9660 file systems. (previously only Standard/ASCII was supported)
- Added: Ability to build ISO9660 file systems where files can have no extension at all (not even a '.' (dot)).放寬檔名限制
- Added: Options to disable warnings when checking 'seamless' or 'don't update ifo/bup files' boxes in the layer break dialog windows.
- Added: Options to automatically check the 'seamless' and 'don't update ifo/bup files' boxes in the layer break dialog windows.
- Added: Support for reading/parsing UDF v2.50 - as used on HDDVD / Blu-ray discs.
- Added: Build mode now has the ability to look for and optimise duplicate files so that only 1 copy of that file actually exists in the ISO/on the disc.
製作all-in-one光碟會用到的東西
- Added: /EJECT CLI command.
- Added: 'Auto Change Book Type' option to the settings. This is only used for LG and Samsung drives. When enabled (default),
it will make the program send the appropriate command to tell the drive to booktype the disc to DVDROM at the start of every burn -
obviously just for Plus format media -i.e. DVD+R, DVD+RW, DVD+R DL.
- Added: Ability to insert a layer break position in the MDS file made by the 'Create DVD MDS File' tool.
- Added: Early warning message on DVD Video builds where the files are probably too big for the destination DVD media.
- Added: Checks for people loading '*.000' and '*.ISO' files in Write mode when a '*.DVD' one exists.
- Added: Ability to burn small images JUST to the first layer on DL media (normally you would split the data between layers).
- Added: Warning message if user specified layer break differs from that in the loaded *.MDS/*.DVD file.
- Added: Additional check for file splitting suitability when doing a read/build to hdd using the FAT/FAT32 file system.
- Added: 'Sector Viewer' button to Read/Verify modes in the 'Source' box.
- Added: 'Cancel' option when loading an IBQ file and none of the images are in the right place!
- Added: Files created in Read/Build mode are now (optionally - default = on) pre-allocated. This cuts down on fragmentation.
- Full changelog here.
其他大部為分針對DL作改善