我的BENQ DVD LS DW1655無法用2x跟4x燒錄dvd?
 

為什麼我的BENQ DVD LS DW1655之前還可以用4x燒ps2的dvd遊戲映像檔,但最近要用同樣要用4x的速度燒時卻都出現這樣的訊息....>以4x (5,540 KB/s)的速度燒錄失敗....結束區段錯誤.....
但是以8x卻可以順利燒錄完成,以2x或4x就是不行,而且用的片子還是同一種的,不管用nero或酒精都一樣的情況.....
到底是機子還是片子或系統的問題??希望有那位好心的人士,能幫我解答這個惱人的問題.. :(

順便貼上這個錯誤紀錄,因為我看不懂它的意思,所以想請看的懂的人解答一下~
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/11/2 下午 01:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <BENQ DVD LS DW1655> Version: BCAB - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:

CD-ROM: <IH3434J WHP836T >Version: 1.0 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : ATAPI CDRW 52X32 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST320413A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : IH3434J WHP836T 1.0 dtscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
ATAPI CDRW 52X32 H: CDRom0
BENQ DVD LS DW1655 I: CDRom1
IH3434J WHP836T J: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096364kB)
Free physical memory: 1388MB (1422220kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.6.2006
燒錄 DVD 映像檔
下午 08:47:59 #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

下午 08:47:59 #2 Text 0 File Reader.cpp, Line 124
Reader running

下午 08:47:59 #3 Text 0 File Writer.cpp, Line 113
Writer I: BENQ DVD LS DW1655 running

下午 08:47:59 #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

下午 08:47:59 #5 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1734981 (385:33.06, 3388MB)

下午 08:47:59 #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

下午 08:47:59 #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: BENQ DVD LS DW1655, Media type: DVD+R

下午 08:47:59 #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

下午 08:47:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM模式1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1734982 (1734982) = #1734982/385:33.7
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1734982 blocks [I: BENQ DVD LS DW1655]
--------------------------------------------------------------

下午 08:47:59 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [I: BENQ DVD LS DW1655] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3553243136, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1734982 | lead-out | 1 | 0x41 | 0x00

下午 08:47:59 #11 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

下午 08:47:59 #12 Phase 28 File dlgbrnst.cpp, Line 1724
Speed measurement started

下午 08:47:59 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

下午 08:49:47 #14 Text 0 File WriterStatus.cpp, Line 116
<I: BENQ DVD LS DW1655> start writing Lead-Out at LBA 1734982 (1A7946h), length 0 blocks

下午 08:49:47 #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

下午 08:49:47 #16 Phase 29 File dlgbrnst.cpp, Line 1673
Speed measurement completed: 24.1x (33,384 KB/s)

下午 08:49:47 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)

下午 08:49:47 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

下午 08:49:47 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x03aaba00: Len x804

下午 08:49:47 #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

下午 08:50:18 #21 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01
Buffer x04ef0000: Len x10000
0xC5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5
0xC5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5
0xC5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5 C5

下午 08:50:18 #22 CDR -1176 File Writer.cpp, Line 302
Session fixation error
I: BENQ DVD LS DW1655

下午 08:50:19 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

下午 08:50:19 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

下午 08:50:19 #25 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 2004/8/3 下午 02:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

你是使用啥牌子的碟片阿，要不要其他碟片再試試看。