全漢ATX 1.3沒有12V 4Pin接頭？
 

我之前和PCDVD的大頭電腦買了一個全漢的350W ATX 1.3 POWER（在MSN和信件中我確定有說是ATX 1.3規格，然後他跟我說是庫存品，我說OK），但是今天安裝電腦時發現，居然沒有4Pin 12V接頭，
但是有附一個轉接頭（就是長方形4Pin轉4Pin 12V），想請問大家？

1.我被騙了，只要是ATX 1.3就一定有4Pin 12V！
2.我想太多，ATX 1.3的規範裡並沒有強制規定一定要有4Pin 12V，
所以下次自己要先問清楚！

謝謝解答！

ATX 1.3 April, 2003
• Update Power and Current guidance
• Added efficiency guidance at typical and light load
• Increased min efficiency at full load from 68% to 70%
• Serial ATA* connector definition added
• Acoustic levels added for low noise power supply design
• Reformat and update revision table
• Update Disclaimers
• Remove guidelines for ATX
• Remove guidance for –5V rail
• Updated guidance for Energy Star and stand by efficiency

ATX 2.0 February, 2003
• Added Terminology section
• Updated power and current guidance
• Includes 250W, 300W, 350W, and 400W guidance
• Updated cross regulation graphs
• Updated load tables
• Updated required efficiency targets. Added recommended
efficiency targets.
• Increased required minimum efficiency at typical and light
• Main Power Connector changes to 2x12.
• Aux power connector removed.
• Required Serial ATA Connector.
• Isolated current limit on 2x2 connector for 12V2 rail.

前輩給的的ATX12V PSDG2_2

話說有某幾個網站上有XD....

這是公開的資訊吧 :ase :ase

之前看過那款好像並不是全漢的喔。有鎂加代理的比較保險。