[求助]燒錄時發生寫錯誤..
 

我今天買了些DVD-R(QUENTIN)來試試新換的nu 16x DVDR/RW DDW-164
當用nero燒到3x%時卻發生錯誤
然後我試試其他燒錄software
結果亦發生錯誤.............OTL

驅動程式日期 2001/7/1
驅動程式版本 5.1.2535.0

發生的錯誤:

14:13:40 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:13:40 #2 Text 0 File Reader.cpp, Line 126
Reader running

14:13:40 #3 Text 0 File Writer.cpp, Line 124
Writer DVDR/RW DDW-164 running

14:13:41 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

14:13:41 #5 Text 0 File Burncd.cpp, Line 3152
Turn on 光碟一次燒錄(DAO), using DVD media

14:13:42 #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1450271 (322:16.71, 2832MB)

14:13:42 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

14:13:42 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDR/RW DDW-164, Media type: DVD+R

14:13:42 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:13:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1450272 (1450272) = #1450272/322:16.72
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1450272 blocks [DVDR/RW DDW-164 ]
--------------------------------------------------------------

14:13:48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDR/RW DDW-164 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2970157056, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1450272 | lead-out | 1 | 0x00 | 0x41

14:13:49 #12 Phase 24 File dlgbrnst.cpp, Line 1855
檔案暫存作業開始

14:13:49 #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

14:13:49 #14 Phase 25 File dlgbrnst.cpp, Line 1855
檔案暫存作業完成

14:13:49 #15 Phase 36 File dlgbrnst.cpp, Line 1855
以8x (11,080 KB/s)的速度開始燒錄

14:13:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:13:49 #17 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A76000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

14:13:49 #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 4:40,459 (280459ms) -> OK

14:13:49 #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: No

14:14:59 #20 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0D5B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0xDD 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

14:14:59 #21 CDR -1135 File Writer.cpp, Line 304
寫錯誤

14:14:59 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

14:15:00 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

14:15:02 #24 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

14:15:02 #25 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

14:15:02 #26 Phase 38 File dlgbrnst.cpp, Line 1855
以8x (11,080 KB/s)的速度燒錄失敗



這是甚麼出錯??

簡單來說：

我不知道 :unbelief:

進一步的說：

換一種空片試看看

比較具體的說：

樓主的NU 16X的軔體版本對應空片資料庫中，並沒有對應DVD-R(QUENTIN)的資料，導致NU 16X無法以正確的方式燒錄，最後導致燒錄失敗....

純路過...

原來如此.....
昨晚我成功燒了1片出來........
但失敗了6片...........

買錯了，真的買錯了，三台地雷機其中一台就是這玩意，MSI F版(最近F2版也出了千萬小心),Aopen 1608/Arr,nu 164(要買Nu的產品請買Nu 163或Nu 165)

是甚麼意思????
地雷機??

只是燒DVD+R有問題.....
而燒CD-R卻很順利..