INFINITY Firmware Upgrade V1.5
 

http://www.infinitymod.com/cgi-bin/...finity_software

MI出了個1.5版f/w,可支援與HDD有關的DEV2 mode。

可惜弟英文差不太敢貿然嘗試...post相關訊息在此希望本領高強的大大能夠告訴想改F/W1.5去用DEV2的朋友該怎麼動作才好。


======================
INFINITY FIRMWARE V1.5
======================


What's new :
------------

- DEV2 mode
- Option menu cosmetic changes


Notes :
-------

- DEV2 mode has been implemented.
To install applications to be used as DEV2 mode, you will need to use the special
Dev2Install Software downloadable from the Infinity Software Section of our Website.
This program enables you to install any PS2 executable on your HDD and lauch it as
the default DEV2 program.

Pressing L1 on boot will launch an application directly from the HDD


- Option menu color scheme was changed to offer better readability on some tv sets.



Infinity option configuration menu :
------------------------------------

Press TRIANGLE + CIRCLE to enter the configuration menu.


PS2 SCREEN FIX : OFF : Disables PS2 video fix.

COLOR : Games will be output on their original video mode (PAL/NTSC)
with color correction applied to match your PS2 region.

PAL : Force video mode to PAL

NTSC : Force video mode to NTSC

PAL60 : Force all games to NTSC with color correction.
Games will run faster but screen might need adjusting.

Y SCREEN FIX : OFF : Y screen position fix is disabled.

AUTO : Y position fix enabled with default settings.
Should be fine for most television sets.

+/- N : Fine tune Y position.
Positive values move the screen down, Negative values move it up.

PSX SCREEN FIX : ON/OFF : Enable/Disable PSX screen fix

MC16 PATCH : ON/OFF : Enable/Disable D4TEL memory card support

ATAD AUTO PATCH : ON/OFF : Enable/Disable ATAD auto patch

MACROVISION FIX : ON/OFF : Enable/Disable Macrovision patch

GREEN FIX : ON/OFF : Enable/Disable green correction on DVD movies

DVD VIDEO REGION : 1..8 : Selects the DVD player region.
Use it to match the corresponding region on RCE protected discs.

DVD9 DL SUPPORT : ON/OFF : Enable/Disable Double Layer patch

BOOT MODE : AUTO : Normal behaviour. All discs wil autoboot.

FAST : FastBoot.
Same as pressing SELECT on boot.

INFMAN : Execute Infinity Manager on mc0:
Same as Pressing TRIANGLE on boot.

DEV1 : Execute BOOT.ELF on mc0:
Same as Pressing R1 on boot.

DEV2 : Execute BOOT.ELF on HDD
Same as Pressing L1 on boot.

DVDV : Force DVD video mode.
Same as Pressing CIRCLE on boot.

PAD DETECT TIME : 2..10 : Select time to wait for connected pad on boot.
Only useful if pad is left unconnected.

BOOT LOGO : ON/OFF : Enable/Disable Matrix boot logo.

DEFAULT LANGUAGE : LANG : Default language to use for FastBoot/InfMan/Dev1 mode.




BURNING TO CD:
--------------

- Create a directory on your desktop or other location of your HD.
- Unzip the ".cue" and ".bin" files present inside the .zip file into this directory.
- Open your preferred burning program (Nero, alcohool120%, etc etc.) and choose
option to burn a "CD-ROM ISO".
- Press the file selection button and choose file type "Image Files (.cue)".
- Navigate to the directory where you unzipped the V1.5 files and select the
"infv15.cue" file.
- Burn the CD.


UPGRADING INFINITY:
-------------------

- Insert the burned CD into the PS2 and press reset.
The CD should boot authomatically and you will be presented with the Upgrade sreen.
- Follow instructions on screen to upgrade Infinity.

- NOTE : You can always recover from a bad flash by hoding the reset button until
==== the blue eject light turns on. This will let you boot the upgrade disc
to reflash your Infinity.



STANDARD OPERATION FOR THE MATRIX INFINITY:
===========================================

BOOT OF PS2 / PS1 / DVD MOVIES:
-------------------------------

- Insert the disc inside the PS2.
- The infinity will recognize the kind of disc you inserted and select
the appropriate boot system.


TURNING OFF THE INFINITY:
-------------------------

- Press START on joypad 1 until the writing "DISABLED" will appear on screen.
- Press reset once.
- The Infinity is now disabled until PS2 is turned off to Standby Position.


FAST BOOT OF PS2 GAMES:
-----------------------

- Press SELECT on joypad 1.
- PS2 Logo will be skipped and game will boot directly.


FORCING PS1/DVD MODE:
---------------------

- Press CIRCLE on joypad 1.
(This option is only needed just in case someone needs to force the PS2
to boot in PS1/DVD mode).


FORCING AUTO MODE:
---------------------

- Press CROSS on joypad 1.
Useful to temporarily skip the default boot mode when set to something
other than AUTO.


LAUNCHING MEMORY CARD APPLICATIONS:
-----------------------------------

- Press TRIANGLE on joypad 1.
- If installed, the Infinity Manager will appear and show a list of
installed applications.

-or-

- Press R1 on joypad 1.
- If installed, the default boot application (mc0:BOOT/BOOT.ELF) will
be launched.


LAUNCHING HDD APPLICATION (DEV2 MODE):
--------------------------------------

- Press L1 on joypad 1.
- If correctly installed, the default application will be executed from the HDD.




---

If you have any suggestion, or would like us to add some special or particual
option, feel free to mail your suggestions at: and
we will see if it will be possible to add it in the coming releases of the
Infinity Firmware and/or the Infinity Manager.





============================
INFINITY DEV2 INSTALLER V1.0
============================


This program enables you to install any PS2 executable on your HDD and
lauch it as the default DEV2 program. This will let you play with DEV2
mode until the new HDD enabled Infinity Manager will be released.

To use it :

- Rename the ELF executable that you want to use as BOOT.ELF
- Burn a PS2 cd with all the files included in this archive and your
selected BOOT.ELF.
- Boot the cd and follow the on-screen instructions.


E.G. to use PS2OS directly from the HDD :

Rename the file PS2OS.ELF as BOOT.ELF and burn a cd with the following
files :

DUMMY.BIN
DUMMY2.BIN
SYSTEM.CNF
DEV2I.ELF
BOOT.ELF

After the installation is complete you can launch PS2OS directly from
your HDD by holding L1 just after reset (or select DEV2 as the default
boot mode in the config screen).