緩衝區太大?......=.=a
 

請教各位大大= =

我的A09前陣子開始無法燒錄
也送回去修過..不過送回來後還是一樣出現這問題
就是使用nero燒錄一開始後
檔案暫存作業完成..要開始燒錄時..就出現以下訊息

Pioneer DVD-RW DVR-109
緩衝區太大
Pioneer DVD-RW DVR-109\H3 T1
產生DVD高相容性外框
產生DVD外框完成
以4.x的速度燒錄失敗


Log 檔內容如下

Sonic Fox
Fox Workstation
1A23-0009-9130-2231-7614-5321

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'H:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/10/26 下午 06:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c

Recorder: <PIONEER DVD-RW DVR-109> Version: 1.50 - HA 3 TA 1 - 6.6.0.12
Adapter driver: <viadsk> HA 3
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 4 TA 0 - 6.6.0.12
Adapter driver: <a347scsi> HA 4

=== Scsi-Device-Map ===
DiskPeripheral : ST380021A 3.19 viadsk Port 2 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52327S QS04 viadsk Port 3 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-109 1.50 viadsk Port 3 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON LTR-52327S F: CDRom1
PIONEER DVD-RW DVR-109 G: CDRom7
AXV CD/DVD-ROM D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 1048576 (1048576) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 159MB (163120kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2005
UDF編製
下午 06:55:22 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

下午 06:55:22 #2 Text 0 File Reader.cpp, Line 127
Reader running

下午 06:55:22 #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running

下午 06:55:22 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

下午 06:55:22 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1185935 (263:32.35, 2316MB)

下午 06:55:22 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

下午 06:55:22 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 1

下午 06:55:22 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

下午 06:55:22 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1185936 (1185936) = #1185936/263:32.36
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1185936 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

下午 06:55:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2428796928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1185936 | lead-out | 1 | 0x41 | 0x00

下午 06:55:23 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

下午 06:55:23 #12 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

下午 06:55:23 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

下午 06:55:23 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

下午 06:55:28 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

下午 06:55:28 #16 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R01
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 52 30 31 02 38 ...RICOHJPNR01.8
23 54 37 09 00 3C 67 00 - AC 62 16 18 0B 0B 0A 0B #T7..<g..b......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

下午 06:55:28 #17 Text 0 File DVDPlusRW.cpp, Line 648
Start write address at LBA 0
DVD high compatibility mode: Yes

下午 06:55:28 #18 SCSI -31 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x07FE0600
Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

下午 06:55:28 #19 CDR -31 File Writer.cpp, Line 311
Buffer too large
PIONEER DVD-RW DVR-109\H3 T1

下午 06:55:28 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

下午 06:55:28 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

下午 06:55:30 #22 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

下午 06:55:30 #23 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

下午 06:55:30 #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.19E, size=20576 bytes, created 2004/10/21 上午 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\viadsk.sys': Ver=5.1.2600.320, size=56576 bytes, created 2003/6/19 下午 06:00:00 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 上午 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


請問這到底該如何解決....因為才剛送修回來...照理應該沒壞才對

換張片子(別種)燒看看...