PCDVD數位科技討論區

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)
-   效能極限 (https://www.pcdvd.com.tw/forumdisplay.php?f=18)
-   -   通過32M但給prime95秒殺代表什麼意思? (https://www.pcdvd.com.tw/showthread.php?t=470906)

kenshum 2005-04-09 12:41 PM

通過32M但給prime95秒殺代表什麼意思?
 
很混亂,可以解說一下嗎?

maskedrider555 2005-04-09 12:43 PM

通過PI 32M不代表Prime95一定會過

boylee 2005-04-09 12:55 PM

代表電腦不穩定
還有改善的空間

kima 2005-04-09 12:59 PM

外頻稍微降一下跑235看看

jazz5 2005-04-09 01:56 PM

這樣講好了,就算說算完了PI 32M也只是代表算完了圓周率,但算完的數值是錯的,有興趣請到PI的資料夾,裡面有算好的圓周率文件檔,在上網找正確的圓周率比對,prime95有驗證機制,會將算完後的數值跟正確答案比對,能通過24小時prime95你才能體會到,什麼叫做穩。

chonshon 2005-04-09 03:19 PM

代表你電腦還是不夠穩囉
super pi不是測試系統穩定的萬靈單
它只是一種電腦浮點運算的測試 :agree:

forkid 2005-04-09 05:30 PM

代表電腦不穩定,Super PI比較接近測效能的程式.......

knok 2005-04-10 12:01 PM

我跑的prime2004錯誤
 
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 927 Time: 15
CPU: 1913MHz FSB: 166MHz [166MHz x 11.5 est.]
2005/4/10 上午 11:55 Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 1 minutes 8 seconds - 1 errors, 0 warnings.
Execution halted.
我跑的prime2004錯誤請問哪裡不完善 :cry:

chonshon 2005-04-10 12:07 PM

引用:
作者knok
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 927 Time: 15
CPU: 1913MHz FSB: 166MHz [166MHz x 11.5 est.]
2005/4/10 上午 11:55 Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 1 minutes 8 seconds - 1 errors, 0 warnings.
Execution halted.
我跑的prime2004錯誤請問哪裡不完善 :cry:

CPU不夠穩
需要加強散熱或是加壓

kenshum 2005-04-10 01:27 PM

現在改成235,穩定了。
但超上不跟散熱系統有關嗎?? 我用的只是原廠CPU風扇和原廠晶片風扇,沒有其它的風扇了.......


所有的時間均為GMT +8。 現在的時間是11:06 PM.

vBulletin Version 3.0.1
powered_by_vbulletin 2026。