PCDVD數位科技討論區 - 求救!燒錄一直出現"通訊失敗"@@

引用:

作者NoNo

您是用Nero燒而出現"通訊失敗"的訊息嗎?建議您先移除酒精跟MYDVD後就只用NERO試一下,另外一提的是NERO6.6.0.6在6.6.0.5出來沒幾天就被換下場,很可能是有某些問題,也建議您換到6.6.0.6.

感謝這位大大~
我已換到6.6.0.6也把酒精跟Mydvd砍了...結果還是一樣@@~

以下是錯誤的log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/10/26 下午 04:21:30
Nero Version: 6.6.0.6
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.01 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <E-IDE CD-ROM 52X L >Version: 31 - HA 1 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722512VLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-75DEA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : E-IDE CD-ROM 52X L atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 G: CDRom0
E-IDE CD-ROM 52X L H: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 45MB (46136kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.1.2005
光碟映像檔
下午 08:38:56 #1 Text 0 File Burncd.cpp, Line 2870
PIONEER DVD-RW DVR-109
防燒壞保護已啟動

下午 08:38:56 #2 Text 0 File Reader.cpp, Line 127
Reader running

下午 08:38:56 #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running

下午 08:38:56 #4 Text 0 File Burncd.cpp, Line 3155
Turn on 軌道一次燒錄(TAO), using CD-R/RW media

下午 08:38:57 #5 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 352647 ( 78:23.72)

下午 08:38:57 #6 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

下午 08:38:57 #7 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: PIONEER DVD-RW DVR-109;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

下午 08:38:57 #8 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

下午 08:38:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM模式1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 352648 (352648) = #352648/78:21.73
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 352646 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

下午 08:38:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [PIONEER DVD-RW DVR-109] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 722530304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
352648 | lead-out | 1 | 0x41 | 0x00

下午 08:38:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1110
Removed 2 run-out blocks from end of track 1. Length: 352648 -> 352646.

下午 08:38:57 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

下午 08:38:58 #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

下午 08:38:58 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

下午 08:38:58 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 32x (4,800 KB/s)

下午 08:38:58 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

下午 08:38:59 #17 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Buffer underrun protection -> ON

下午 08:39:00 #18 SCSI -1024 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04AE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x08 0x03

下午 08:39:00 #19 CDR -1024 File Writer.cpp, Line 311
Communication failure

下午 08:39:00 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

下午 08:39:00 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

下午 08:39:01 #22 CDR -201 File WriterStatus.cpp, Line 157
Invalid write state
PIONEER DVD-RW DVR-109\H1 T0

下午 08:39:01 #23 TRANSFER -18 File WriterStatus.cpp, Line 157
Could not perform EndTrack

下午 08:39:01 #24 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 32x (4,800 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/7/12 上午 08:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)