這一切是幻覺! C4.11B "官方發布" .....98/ME版~~~
 

不是幻覺是真的~~~
這次新增了RadeonX300、RadeonX600、RadeonX800系列的支援(4.10沒有支援)

BETA CATALYST 4.11 release for RADEON X300, RADEON X600, and RADEON X800 AGP Series
http://www.ati.com/support/drivers/...=10&submit.y=10

才說就介面沒a.i.和新反鋸齒而已馬上下午就出現.....現在是怎樣阿....好樣的ati

但是....這次控制台還是沒有A.I.的選項...... -.-"....搞笑喔......
(有大大知道如何從登錄檔中開啟A.I.嗎?)
剛剛跑了FFXI B2不會當機(只是確定會不會當而已).但分數比C4.9.C4.10還低......

4.11B讀我檔
http://www2.ati.com/drivers/Catalys...otes-WinME.html
也沒提到做了啥改善...........算了~98有新驅動就很感謝了~~~

------------------------------------------------------------

還有提到阿速ASUS P4G8X...又衝了嗎?....原文看不懂.
是和垂直同步有衝突嗎?....反正垂直同步也沒開過.......沒差~~~

ATI RADEON™ X800 and ASUS P4G8X Deluxe Motherboard leveraging Intel's E7205 chipset
Screen corruption (flashing color bars) will been seen when running certain direct-draw or D3D applications on systems using an ASUS P4G8X Deluxe motherboard leveraging Intel's E7205 chipset and an ATI RADEON™ X800 series installed. This issue can be avoided by setting the Wait for Vertical Sync to always off. To do this, follow these steps:

Launch the ATI Control Panel.
Select the ATI 3D tab.
Click the Use custom settings check box. A check mark is displayed in the box.
Click the Custom button. The ATI 3D Properties page is displayed.
Set the Wait for Vertical Sync: to Always Off.
Click, Apply
Click, OK

簡單測試

配備如下
win98se+4in1 4.51+C 4.11B

2003預設
400/700-5746

412/730-5976

感覺98版4.11b和4.10 4.09差不多
由分數看來98版的催化劑好像可能根本沒有配備A.I.的樣子???
(控制台都沒有該選項.......小弟不知A.I.的登錄檔名稱.......所以也不確定)
FFXI B2
2者都在40xx~410x誤差值內......

喔,推一下文章:laugh:
期待Omega出新版