Athlon CPU SoftCooler 1.2 build 53
 

Athlon CPU SoftCooler 1.2 build 53
Significant power savings of the AMD Athlon processor only occur if the processor is disconnected from the system bus by the Northbridge while in the Halt or Stop Grant state. The Northbridge can optionally initiate a bus disconnect upon the receipt of a Halt or Stop Grant special cycle. The option of disconnecting is controlled by an enable bits in the Northbridge.

Program key features:
- Enables bus disconnect bit in the Northbridge.
- Full control under Clock Control (CLK_CTL) MSR
that determine the internal clock divisor when
- Athlon system (S2k) bus is disconnected

Supported processors:
AMD Duron, Athlon Processors Model 2,3,4 (w/ limitations)
AMD Duron, Athlon, Athlon XP/MP Processors Model 6 & upper

Supported chipsets:
VIA KT133, KT133A, KLE133, KX133, KM266, KT266, KT266A, KT333, KT333 CF,KT400,KM400, KT600

nVidia nForce series, nForce2 SIS 730, 733, 735, 740, 745, 755, 746, 748

AMD 751, 760, 761, 762

感謝∼下載試用中

不知道效果有沒有比 cpuidle extreme 好??

感謝分享:)
不過還沒有支援K8...

不知道它可以調整的數字是越大越有效果 還是越小越有效果?
不過 windows xp 應該已有內建 halt diconnect 的功能了
這套軟的的差別則是多了參數可以調整....
不過, 那些參數又代表什麼?

恩 下載了 也安裝了 不過視窗好小...有那一個大大可以教學阿...乾恩阿:D

不知道是不是設定不對，
完全沒有效果@@
而且視窗好小，根本看不見…:(

同意......小到不行XD

我也是因為視窗以及字體太小根本無法設定

所以很早就放棄了

請問該怎麼調教

OS使用Win2000與WinXP還需要裝嗎